so i have recently stroked the motor to 2.2 gsc kit, gsc ported head with over sized valves,gsc s2 cams, and ams f1-I manifold and 75mm boomba throttle body. im trying to get it started to break the motor in i changed the tune to 93 octane. which was done by ams but ive never ran it on it before always ran my c-16 tune but now when i start it it revs up to 3000 and leans out and the motor dies. is this because i have to much air and not enough feul or something mechanical? it has 42 psi of fuel so i know thats not the problem. i was wondering if u can make me a fuel map so i can break it in. some other mods i have are ams intercooler and piping with stock bov, ams full exhaust, stock ecu, stock turbo for now, ams fuel rail with pressure reg, walbro fuel pumpand rc 1000cc injectors, wideband shep trans and transfer case any help would be greatly appreciated after the motors broke in ams is going to tune it.

 

plus its an evo 9 and have ecuflash with a tactrix cable

 

anybody got anything