How to track the cells being used with evoscan
#16
Newbie
Judging from your screenshot, it would appear that the definition for your ROM is pooched. I had that happen to me a while back. I copied the EVO7base.xml definition (the one I needed) from ECUFlash into the proper EvoScan folder, and now my table axis are good again. I can load any of my old logs and follow the load cell traces.
#18
Judging from your screenshot, it would appear that the definition for your ROM is pooched. I had that happen to me a while back. I copied the EVO7base.xml definition (the one I needed) from ECUFlash into the proper EvoScan folder, and now my table axis are good again. I can load any of my old logs and follow the load cell traces.
I did change a few of the values In the timing table to give the load a wider range. Could that have effected anything?
Because that is the ROM for the 2005 USDM Evo 8 as opposed to yours which appears to be a Tephra V7 ROM. If anything I could swap to the 96530006, which is the EDM for an '05. I'll be honest I'm new to this while ROM/definition/XML stuff. It's a bit of a blur.
Last edited by 9!'clipseDOHC; Jul 31, 2012 at 08:19 PM.
#19
Evolved Member
iTrader: (6)
Did not mean any offense just curious. I guess that I had not seen that stock 05 map put up before. Was curious if it was some aus rom or something.
I tired the EDM "universal" 9653 but I found to like the 94170015 more, even over the stock rom 9417008 that my car came with. Then switching over to Tephra V7 from Tephra V5 was a big improvement. Love me some Big Maps.
I am sure that you have already seen it but this page was helpful to me...http://evoecu.logic.net/wiki/Downloads
I tired the EDM "universal" 9653 but I found to like the 94170015 more, even over the stock rom 9417008 that my car came with. Then switching over to Tephra V7 from Tephra V5 was a big improvement. Love me some Big Maps.
I am sure that you have already seen it but this page was helpful to me...http://evoecu.logic.net/wiki/Downloads
#21
Did not mean any offense just curious. I guess that I had not seen that stock 05 map put up before. Was curious if it was some aus rom or something.
I tired the EDM "universal" 9653 but I found to like the 94170015 more, even over the stock rom 9417008 that my car came with. Then switching over to Tephra V7 from Tephra V5 was a big improvement. Love me some Big Maps.
I am sure that you have already seen it but this page was helpful to me...http://evoecu.logic.net/wiki/Downloads
I tired the EDM "universal" 9653 but I found to like the 94170015 more, even over the stock rom 9417008 that my car came with. Then switching over to Tephra V7 from Tephra V5 was a big improvement. Love me some Big Maps.
I am sure that you have already seen it but this page was helpful to me...http://evoecu.logic.net/wiki/Downloads
Here it is in ECU flash: (Columns are normal)
And here it is in EvoScan Map Tracer: (Columns are jacked up)
This is the same exact ROM file on both applicaions and the one that is currently in my car. How do I made the columns line up correctly on Map Tracer? If this was your car what would you try first? (But I need step by step becuase I'm a noob at this)
Last edited by 9!'clipseDOHC; Aug 1, 2012 at 09:52 AM.
#27
Evolved Member
iTrader: (6)
Another thing that happened to me was the valle mode was automatically put on for some reason. You might double check that it is disabled.
Does the cel blink when you put the key to on? If so the Valle mode is on.
#28
Did you use the imobilizer that it originally had or the one you put on there?
Another thing that happened to me was the valle mode was automatically put on for some reason. You might double check that it is disabled.
Does the cel blink when you put the key to on? If so the Valle mode is on.
Another thing that happened to me was the valle mode was automatically put on for some reason. You might double check that it is disabled.
Does the cel blink when you put the key to on? If so the Valle mode is on.
#30
I read this thread: https://www.evolutionm.net/forums/ec...6940011-a.html, and they expirienced the same thing I did and it seems like the big thing is using 96530006. I'm reading this thread now, https://www.evolutionm.net/forums/ec...9694011-a.html, and it's the same thing about swapping from 96940011 to 96530006. Why did you say that you don't like the 96530006 ROM?
Originally Posted by razorlab
Well I got some bad news for the 05 guys.
Tephra sent me a 94170014 v5 rom to try and flash into my 05 Ecu.
It flashes fine. Just the car won't start afterwards.
Even tried some non V5 mod 94170014 and 94170015 with no luck.
Doh.
Tephra sent me a 94170014 v5 rom to try and flash into my 05 Ecu.
It flashes fine. Just the car won't start afterwards.
Even tried some non V5 mod 94170014 and 94170015 with no luck.
Doh.
Last edited by 9!'clipseDOHC; Aug 5, 2012 at 09:18 PM.