Whooopasss

iTrader: (5)

Power (red)----pin 25
ground (brown)----pin 26 (closer to ECU)
ground (black)-----pin 26 (away from ECU)
RPM (green)-----pin 58
TPS (grey)------pin 84
Air flow signal out (pink)----pin 90 (closer to ECU)
Air flow signal in (orange)------pin 90 (away from ECU)
Knock sensor (purple)------pin 78

for some strange reason, one post showed RPM as pin 88.. http://www.evotuners.net/forums/show...?&threadid=111 totally screwed my RPM.. it was reading low.. switching to pin 58 fixed it..

mvm42699

iTrader: (2)

Does it apply to the SAFC II as well.

Whooopasss

iTrader: (5)

Yup.. see the thing is, the instructon says RPM is on pin 88, but that is the cam sensor.. right pin for RPM (green wire) is pin 58 (RPM signal). Found it the hard way.