is it the male or female side of the fields harness that is the ecu side. I'm getting some weird readings (i.e. throttle at ~25% at idle and nothing from the rpm) and wanted to make sure I don't have everything wired backwards or upside down or something. Thanks guys

 

Wired it wrong. At idle, you should at most bounce from 0-2% throttle to whatever standstill idle from 800-1200 rpm.

 

male ecu side.. read thread 'right ecu pin out" https://www.evolutionm.net/forums/sh...ad.php?t=87567

 

thanks, got it hooked up and it kicks ***