Notices
Lancer Aftermarket Forced Induction Tech Discuss forced induction related specs and upgrades for custom aftermarket setups.

TSI Non-IC Kit

Old Feb 16, 2005 | 06:58 PM
  #76  
Boeturbolancer's Avatar
EvoM Guru
iTrader: (26)
 
Joined: Dec 2002
Posts: 2,791
Likes: 1
From: Hemet, CA
AirQuez... good points.

Phantom0 is way off on things... we've seen boosted lancers pushing 10-12 psi for over 2 years now. Hell i did more than that for a long time and only had issues when i up'd boost due to always wanting more. Maybe turbo isn't for you as you may not be willing to invest the care in the car it takes to make it last. It just takes patients and caring.
Reply
Old Feb 16, 2005 | 08:20 PM
  #77  
maxum17ft's Avatar
Evolving Member
iTrader: (7)
 
Joined: May 2004
Posts: 441
Likes: 0
From: hazleton, pa
what kind of caring is involved w/ owning a turbo i mean you are making it sound like its a nightmare to care for. what has to be done say on a weekly/monthly/yearly basis.
thanks
Reply
Old Feb 16, 2005 | 08:36 PM
  #78  
Boeturbolancer's Avatar
EvoM Guru
iTrader: (26)
 
Joined: Dec 2002
Posts: 2,791
Likes: 1
From: Hemet, CA
you have to watch you car for leaks... if there are any fix them. You have to watch you oil level... if its low fill it up. You need to watch you egt's... if your getting hot get off the gas. Simple really. The biggest thing i ever had to do was watch the egt's. I was always pushing the envelope and 4 time rebuilt the motor due to that. If i'd have just kept things at the kit settings i would have been fine. I loved the power though!!
Reply
Old Feb 16, 2005 | 08:46 PM
  #79  
maxum17ft's Avatar
Evolving Member
iTrader: (7)
 
Joined: May 2004
Posts: 441
Likes: 0
From: hazleton, pa
sounds good, same thing as my eclipse was, only watch the egt's, btw: what should the egt temp get to before you should back off. i heard about 750 max. but im not sure
Reply
Old Feb 16, 2005 | 10:46 PM
  #80  
acs_guitars's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Oct 2004
Posts: 276
Likes: 0
From: Tulsa
if it hits 750-800 you should watch it and ease up off the gas. I believe it was said earlier in this post that 800-850 is about the highest you'd ever want to go. High EGT = High Block temps and Intake temps which cause some major problems!!!! Around 1100 you will get that nice cherry glow starting NOT GOOD AT ALL

Reply
Old Feb 17, 2005 | 07:39 AM
  #81  
Phantom0's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2003
Posts: 202
Likes: 0
From: Ca
i hear what yur saying. Me personally am not responsible enough to run a custom turbo. however if i owned a car that cost 30G's i would never pop the hood. SCARED. I don't think turbo is for me. I searched for EVO last night and my credit union says that i need 6000 down. wow thats alot of money.
Reply
Old Feb 17, 2005 | 07:41 AM
  #82  
Phantom0's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2003
Posts: 202
Likes: 0
From: Ca
screw it, i'll figure something out.
Reply
Old Feb 17, 2005 | 08:50 AM
  #83  
FlLancer's Avatar
EvoM Staff Alumni
20 Year Member
iTrader: (2)
 
Joined: Jun 2004
Posts: 634
Likes: 0
From: MindYaBusiness
Hope you don't have any pets or kids phantom .
Reply
Old Feb 17, 2005 | 03:30 PM
  #84  
Hotshot940's Avatar
Evolved Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 1,555
Likes: 0
From: Columbus, Ohio
ok your EGT numbers are all way off. a turbo lancer IDLES at about 900 degrees. how in the hell are you going to ease of the gas then? aluminum melts at around 1600 degrees. don't get anywhere around that, simple as that. at WOT im anywhere in the ballpark for 1300-1450.
Reply
Old Feb 17, 2005 | 03:35 PM
  #85  
Hotshot940's Avatar
Evolved Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 1,555
Likes: 0
From: Columbus, Ohio
*waits for confirmation from BOE*
Reply
Old Feb 17, 2005 | 03:51 PM
  #86  
Phantom0's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2003
Posts: 202
Likes: 0
From: Ca
i think i should wait for boe myself.
Reply
Old Feb 17, 2005 | 03:54 PM
  #87  
Phantom0's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2003
Posts: 202
Likes: 0
From: Ca
Originally Posted by FlLancer
Hope you don't have any pets or kids phantom .

Just my cat Tedshoes. he would love me even if my motor was blown.
Reply
Old Feb 17, 2005 | 03:56 PM
  #88  
Phantom0's Avatar
Evolving Member
iTrader: (1)
 
Joined: May 2003
Posts: 202
Likes: 0
From: Ca
also is the TSI extreme kit safe for an automatic?
Reply
Old Feb 17, 2005 | 04:04 PM
  #89  
Hotshot940's Avatar
Evolved Member
iTrader: (4)
 
Joined: Oct 2003
Posts: 1,555
Likes: 0
From: Columbus, Ohio
http://www.wrxforum.com/cgi-bin/ulti...c;f=3;t=004269

There ya go kids. I know its not turbo lancers, but its going to give you a basic idea of the kind of temps you should be looking at and the physics behind them.
Reply
Old Feb 17, 2005 | 07:18 PM
  #90  
KillahB's Avatar
Evolved Member
iTrader: (7)
 
Joined: Jan 2003
Posts: 1,011
Likes: 0
From: Orlando FL
First of all, you have to determine what scale is your EGT measuring. Is it in Fahrenheit or Celsius. You DO NOT want your car idling at 900 degrees C; actually it is probably impossible to do that.

Just to do the math for you, idling at 900F is about 482 Celsius, which is a tad high, but still doable. 800 Celsius is the max temp I would want in any turbo car, which equates to about 1500 Fahrenheit. SO check and see what your EGT gauge measures. I can tell you my Apex'i unit measures Celsius.

Just make sure we are measuring apples to apples and oranges to oranges.
Reply

Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:25 PM.