I tried a search without much success and i was wondering if someone could help me out here. I found a 91 Talon turbo with low mileage (about 12,000) on the turbo for really cheap. I was wondering if the 2G manifold will fit on the 2003 Lancer OZ or if it will have fitment problems. I already found out that the GT25 turbo is a nice fit and nice choice for my ride, but wasn't sure how well the manifold will work with this setup. Any help would be great.

 

no the manifold won't fit. stealth-wrx is making custom manifolds for the lancer and he has a T25 flange. might want to pm him.

 

i can honestly tell you that the 4g63 maifold will not fit our cars

 

i picked up a TE04H mitsu turbo, what size flange would i need. And does any one know if rpw sells just a turbo manifold for a t-25

 

Yes. Try contacting Vision Imports for pricing. I asked them a while back, but I'm at work so I don't have the response. It's got flanges for the T25 or T28. Either will fit.

 

You can have a custom manafold built. that is what they do at Norwood performance in Dallas. Most of their applications are custom like twin turbo Ferrari's

 

The 1g DSM twins talon/eclipse and the bastard laser do not have a t25...they use a different turbo the 14b. Only the 2g's come with the T25 (for quicker spool up) I know that the t25 will work on your lancer but I am not sure if the 14b will. Just an FYI.

 

awww... i was hoping on the 14b fitting up to the t-25/t-28 flange. oh well...

 

yes a 14 b will work just fine if you want to custom build the rest of the kit. Check out the pictures of the lancer that I built a custom turbo kit for. It was made from a 14b off of a 91 awd eclipse.

 

RPW now makes a manifold for the lancers to suit both the T-25 eclipse turbo's we beleive, of course we have alway shad the GT sreies turbo manifolds and we have just completed manifolds for the Mitsubishi TD series turbos now as well

 

so basically i could pull all the turbo pieces i needed off of an eclipse/talon and then get the T-25 manifold and dump pipe from RPW?? that sounds good seeing as how i can get all the turbo pieces really cheap. how much would the manifold and dump pipe cost roughly??