ok so i need directions on how to install my cam and degree it and what not. i litterally need step by step directions from taking the old one out to putting the new one in, whose down lol

 

rele? no one knows how to do this...........cmonnnn

 

got this far so far...what next

 

this is rediculous.......is there no one to help : (

 

take the cam gear off. and theres also a bolt inside that cam sensor cover u already took off.. take that out also.. should be it.. and the cam should come out..

then
reverse everything u just did..

 

haha that was all done already....i was more worried about having to degree it and what not. also need the torque specifications for the bolts and orders

 

neone know how to get evoscan for free.....i wanna log my car and just see what its doing, nething else i could use

 

its only 25 bux with free updates. you will end up using it more than you think tho.

josh

 

^ what he said it is pretty awesome!

 

oh.. well in that case. just gotta line the timing belt up properly.. 'degree' it i dont think is the proper term ur lookin for.

trq specs for the rockers.. i dont have those..
and for the headstuds its 60lbs, just make sure to do it in the right order, inner to outer in star pattern. and its suggested to do it in incraments, 15lbs then 30 then 60lbs in the star pattern repeated.

 

latest version link

 

ok so heres what i have, with the new cam in, look how much the valves come out, like quarter inch almost, this deff means the pistons have to be fly cut right????

 

no.. i wouldnt say that.. just means u need to make sure your at TDC and ur timing right.. shouldnt have any problems.. our car factory does that, not as much, but still does that..

what cam is it?

 

stage 2 rpw

 

changed my driver side axle and both outer tire rods today, car rides sooo smooth again, i love it, so this is what i need to know, transmission fluid drained out where the axle goes in, where and what do i replace it and how much, or when do i even know when its full?