03 lancer es Evo 8 build
Thread Starter
Evolved Member
iTrader: (8)
Joined: Oct 2008
Posts: 789
Likes: 0
From: Toms River, New Jersey
well if it were cracked would there be smoke out the exhaust bc theres nothing like that now? and would i get knock or ne other engine codes? and what about lean fuel codes for one injector going bad
Thread Starter
Evolved Member
iTrader: (8)
Joined: Oct 2008
Posts: 789
Likes: 0
From: Toms River, New Jersey
new plug, works fine.....shewwwwww, who knows which brake master cyclinder i can switch to for my brake upgrade
http://www.youtube.com/watch?v=vtDDylAJAUA
http://www.youtube.com/watch?v=vtDDylAJAUA
Last edited by zulu989; Oct 7, 2010 at 01:50 PM.
hrmmm.. MAYBE u should do a full on MSD coil off setup and make sure to get it all hooked up right and hook us up with part numbers.. i know msd pretty well.. But i cnt figure out hwo to do a coilon plug setup on our cars like rabbit and all the ig boy mirage setups do.
hrmmm.. MAYBE u should do a full on MSD coil off setup and make sure to get it all hooked up right and hook us up with part numbers.. i know msd pretty well.. But i cnt figure out hwo to do a coilon plug setup on our cars like rabbit and all the ig boy mirage setups do.
Thread Starter
Evolved Member
iTrader: (8)
Joined: Oct 2008
Posts: 789
Likes: 0
From: Toms River, New Jersey
Trans is at dogbox racing, gonna try and figure out what it takes to make 1st and second a little longer, anyone know what can interchange to give us more top speed or different ratios, I saw a 3rd gen block with an evo head and our trans all bolted up sitting at the shop???
Trans is at dogbox racing, gonna try and figure out what it takes to make 1st and second a little longer, anyone know what can interchange to give us more top speed or different ratios, I saw a 3rd gen block with an evo head and our trans all bolted up sitting at the shop???
So what your sayinh is you can take a 4G64 motor, bolt on an evo 8 head on top, and our transmission is a direct bolt on to the G64 block? if this is possible I might just consider doing this
The evo head will fit onto the 4g64, i did this when i had a 99 galant, not sure about the trans tho, i kno we did 5 speed swaps all the time, cuz the 99-03 galant didnt come with manual trans






