looks good

 

yea i dont need to trim it bc of the mani

 

If I recall all they did was put the 4g94 flange on it. Crypto has a thread on here showing the progress of the manifold when he was building his kit. I could be wrong

 

i was talking about my wastegate when i said actuator

 

for the wastegate I believe you have the Forge adjustable one.
Change out the spring to the 5-10psi one.
I have the nipple routed to the manual boost controller.
The evo 8 turbo has a mount for the wastegate already. Just unbolt the 2 12mm bolts for stock wastegate and slap on the Forge!
As for the adjustable arm, make sure the flange on the hotside is closed, you'll hear it if you play with it (swinging open and closed makes two distinct sounds) Then just adjust the arm to sit on the post for the flange.

 

im lost but anyway, no need to trim, it says it right on the site!!!

 

What are you lost on? We'll try to redirect you...

 

This is the diagram I used to install my manual boost controller. I modified it a little bit since it was off the evo forum and it was the Hallman Pro Evo RX

 

Vacuum lines at your local auto parts store. They're pretty cheap.
As for oil feed line, I got mine made at this local Hose store here in Utah. Only costed $18 for the custom stainless steel braided line and brass fittings.
http://www.houseofhose.com/home.php

If you want I can get them made for you and send it to you with the receipt.



I got my return hose from Lowe's Hardware store. Just normal 5/8" heater hose about a foot of it. and you'll need a 5/8" hose barb to tap into pan

 

nope lol
ill have to organize it in a way i can understand

 

Ok I hooked the wastegate up to that nipple on the jpipe so that as soon and it hit that certain amount of boost it would open...

 

I hooked the wastegate to the MBC and into the intake. I put up the diagram i used. Same exact setup.
The reason I did this is so I can get the boost pressure from the intake manifold side instead of straight out of the compressor

 

ok lets not let this thread die now, cmon keep it going, ive been rele sick so i havnt done too much

 

well i decided to paint my interior bc i was board and im stilllllllllll waiting for parts to arrive so untill then i cant do nething!!! but my interior is looking awesome black and blue. ill get pics of it when im done! Does anyone know anything about replacing the carpet, i want a black carpet!! and what and where do i get it?

 

some people have their carpets for sale in the Evo For Sale section. Check out the partouts section
Hcaruso4 is sellin his for $100
https://www.evolutionm.net/forums/sa...-part-out.html