ROAD/RACE 4G94-Turbo Dyno Sheets!
#22
Former Sponsor
Thread Starter
iTrader: (67)
Join Date: Dec 2001
Location: Santa Fe Springs, CA.
Posts: 7,826
Likes: 0
Received 3 Likes
on
3 Posts
7 on NON-IC with our COLD AIR Intake is fine. Auto boys need to stay at 5 or 6 psi though cause they do not have CAI setup. Still NTRAN99 pulled 173 w.h.p with NON-IC setup in his automatic. Look for his posts from way back.
ROAD/RACE
ROAD/RACE
#26
Evolving Member
iTrader: (4)
Join Date: Feb 2002
Location: VA,USA
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
i have the intercooled stage one with the old reflashed ecu but i have the BOV vented and not recirculating and i have the intake up on top and not as a cold air due to all the crazy weather i get here in maryland... i have a 5spd... your act clutch and pressure plate and kaaz lsd...and a boost controller set at 8psi daily... and i have evos and wrx's with minor bolt ons be like what the ***KK when i pass them... all i can say is... RRM ... yall know what yall doing.. and i appreciate everything
edit... the only problem ive ever had with the turbo kit is the exhaust gasket for the wastegate kept on leaking.. and one time the waste gate fell off... so i just got a metal gasket and that **** is holding on strong... oh and the oil feed lines sorta leaked... but thats just minor problems that can be fixed easily... just make sure that these things are fine on the turbo and everything would be straight... im sure happy with it
edit... the only problem ive ever had with the turbo kit is the exhaust gasket for the wastegate kept on leaking.. and one time the waste gate fell off... so i just got a metal gasket and that **** is holding on strong... oh and the oil feed lines sorta leaked... but thats just minor problems that can be fixed easily... just make sure that these things are fine on the turbo and everything would be straight... im sure happy with it
Last edited by yellow_lancer; Apr 12, 2004 at 09:35 AM.
#29
Evolved Member
iTrader: (1)
Join Date: Mar 2003
Location: Naperville
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
Wait - so boe - there is nothing in the works for us A/T guys? Because if all i can do is reach 193whp with my little lancer im going to be kind of disapointed .
What can us A/T people do to build up our transmissions i guess to help raise the PSI and so forth?
What can us A/T people do to build up our transmissions i guess to help raise the PSI and so forth?
#30
Evolved Member
iTrader: (5)
Join Date: Dec 2002
Location: Lake Elsinore, CA
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
well i have been looking into the rebuilt tranny thing. it isnt a big deal however it is pretty costly. looks like a grand and some change. but after that it will be pretty damn bullet proof. levelten is a company that builds trannies and there are others around. you can go to atra's website (automatic transmission rebuilders association).