i've tried logging with evoscan but something is wrong with the TPS..
max it will show 70+ , but pedal pressed all the way..
and in graph it moves up slowly even though im at WOT...any ideas guys..

 

Completely normal when logging. Nothing to worry about.

 

ok..thanks...can it be fix? because i cant log the hp and torque...need 80% above for TPS..

 

There's nothing to fix - it's not broken. It's a function of the electronic TPS and this exact scenario is mentioned in the factory service manual. A lot of folks use this software, maybe somebody who ran into this can share a workaround? If not, try looking around on the web - there should be plenty of info on this.

 

I have come upon this issue also. Is it just an issue with what the log displays or is the information correct and this is just how the drive-by-wire is programmed? I would think a lot of midrange power could be freed up by having the throttle open more quickly if it is the latter.

 

TPS is not logged correctly on Lancers. Use the ThrottleActuator parameter for logging instead of TPS or enable Mode23 for your ROM and build EvoScan definition file for logging.

 

Thanks LiX. I setup Mode 23 and verified what you are saying,TPS is not logged correctly. With mode 23 the values make sense although TPS does stop at 80%.