03 Lancer Definition File & Flash Help
#16
Newbie
Thread Starter
This is what I get before hooking up the cable and writing the ecu. I'm not with the car now so I can't hook it up to show the no vehicle interface message. Not sure if this helps or not.
[11:22:15.787] EcuFlash Version 1.42.2595
[11:22:15.787] OS Version Windows Vista
[11:22:15.787] Qt Version 4.5.0
[11:22:15.799] 56 memory models read.
[11:22:15.800] scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
[11:22:15.844] 30 ROM metadata models scanned.
[11:22:15.844] checksum module "subarudbw" loaded.
[11:22:15.844] checksum module "mitsucan" loaded.
[11:22:15.845] flashing tool "wrx02" loaded.
[11:22:15.845] flashing tool "wrx04" loaded.
[11:22:15.845] flashing tool "sti04" loaded.
[11:22:15.845] flashing tool "sti05" loaded.
[11:22:15.846] flashing tool "mitsukernel" loaded.
[11:22:15.846] flashing tool "mitsukernelocp" loaded.
[11:22:15.846] flashing tool "mitsubootloader" loaded.
[11:22:15.846] flashing tool "shbootmode" loaded.
[11:22:15.849] flashing tool "shaudmode" loaded.
[11:22:15.850] flashing tool "subarucan" loaded.
[11:22:15.850] flashing tool "mitsucan" loaded.
[11:22:31.628] 262144 byte image read.
[11:22:15.787] EcuFlash Version 1.42.2595
[11:22:15.787] OS Version Windows Vista
[11:22:15.787] Qt Version 4.5.0
[11:22:15.799] 56 memory models read.
[11:22:15.800] scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
[11:22:15.844] 30 ROM metadata models scanned.
[11:22:15.844] checksum module "subarudbw" loaded.
[11:22:15.844] checksum module "mitsucan" loaded.
[11:22:15.845] flashing tool "wrx02" loaded.
[11:22:15.845] flashing tool "wrx04" loaded.
[11:22:15.845] flashing tool "sti04" loaded.
[11:22:15.845] flashing tool "sti05" loaded.
[11:22:15.846] flashing tool "mitsukernel" loaded.
[11:22:15.846] flashing tool "mitsukernelocp" loaded.
[11:22:15.846] flashing tool "mitsubootloader" loaded.
[11:22:15.846] flashing tool "shbootmode" loaded.
[11:22:15.849] flashing tool "shaudmode" loaded.
[11:22:15.850] flashing tool "subarucan" loaded.
[11:22:15.850] flashing tool "mitsucan" loaded.
[11:22:31.628] 262144 byte image read.
#17
Evolved Member
iTrader: (14)
This is what I get before hooking up the cable and writing the ecu. I'm not with the car now so I can't hook it up to show the no vehicle interface message. Not sure if this helps or not.
[11:22:15.787] EcuFlash Version 1.42.2595
[11:22:15.787] OS Version Windows Vista
[11:22:15.787] Qt Version 4.5.0
[11:22:15.799] 56 memory models read.
[11:22:15.800] scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
[11:22:15.844] 30 ROM metadata models scanned.
[11:22:15.844] checksum module "subarudbw" loaded.
[11:22:15.844] checksum module "mitsucan" loaded.
[11:22:15.845] flashing tool "wrx02" loaded.
[11:22:15.845] flashing tool "wrx04" loaded.
[11:22:15.845] flashing tool "sti04" loaded.
[11:22:15.845] flashing tool "sti05" loaded.
[11:22:15.846] flashing tool "mitsukernel" loaded.
[11:22:15.846] flashing tool "mitsukernelocp" loaded.
[11:22:15.846] flashing tool "mitsubootloader" loaded.
[11:22:15.846] flashing tool "shbootmode" loaded.
[11:22:15.849] flashing tool "shaudmode" loaded.
[11:22:15.850] flashing tool "subarucan" loaded.
[11:22:15.850] flashing tool "mitsucan" loaded.
[11:22:31.628] 262144 byte image read.
[11:22:15.787] EcuFlash Version 1.42.2595
[11:22:15.787] OS Version Windows Vista
[11:22:15.787] Qt Version 4.5.0
[11:22:15.799] 56 memory models read.
[11:22:15.800] scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
[11:22:15.844] 30 ROM metadata models scanned.
[11:22:15.844] checksum module "subarudbw" loaded.
[11:22:15.844] checksum module "mitsucan" loaded.
[11:22:15.845] flashing tool "wrx02" loaded.
[11:22:15.845] flashing tool "wrx04" loaded.
[11:22:15.845] flashing tool "sti04" loaded.
[11:22:15.845] flashing tool "sti05" loaded.
[11:22:15.846] flashing tool "mitsukernel" loaded.
[11:22:15.846] flashing tool "mitsukernelocp" loaded.
[11:22:15.846] flashing tool "mitsubootloader" loaded.
[11:22:15.846] flashing tool "shbootmode" loaded.
[11:22:15.849] flashing tool "shaudmode" loaded.
[11:22:15.850] flashing tool "subarucan" loaded.
[11:22:15.850] flashing tool "mitsucan" loaded.
[11:22:31.628] 262144 byte image read.
#18
Newbie
Thread Starter
So I can't use Windows Vista? That's the problem? I was originally going to use my computer that has Windows 7, but kept getting an error message when I was downloading Senate's definition files. I'm going to try my sister's laptop and see if it will work. Running out of options...
#20
Evolved Member
iTrader: (5)
In this line i have an issue with your setup.
scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
You should not have changed this location for the xml files. There are other files like reading definitions so the program knows how to read and write to the cars as well. Point it back to ecuflashes default directory.
c:\program files (86)\openecu\ecuflash\rometadata\
scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
You should not have changed this location for the xml files. There are other files like reading definitions so the program knows how to read and write to the cars as well. Point it back to ecuflashes default directory.
c:\program files (86)\openecu\ecuflash\rometadata\
Last edited by RoadSpike; May 17, 2012 at 04:40 PM.
#21
Evolved Member
iTrader: (14)
In this line i have an issue with your setup.
scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
You should not have changed this location for the xml files. There are other files like reading definitions so the program knows how to read and write to the cars as well. Point it back to ecuflashes default directory.
c:\program files (86)\openecu\ecuflash\rometadata\
scanning for metadata models in C:/Users/toshiba/Desktop/Definitions
You should not have changed this location for the xml files. There are other files like reading definitions so the program knows how to read and write to the cars as well. Point it back to ecuflashes default directory.
c:\program files (86)\openecu\ecuflash\rometadata\
Last edited by 03lances; May 17, 2012 at 05:53 PM.
#22
Evolved Member
iTrader: (5)
it really seems his drivers aren't hooked up. Btw just as a test I decided to put my 1.3 cable on the laptop to see if it would see it without the car attached and it seems ecuflash will continue to say "no vehicle" interface because likely the cable doesn't have any power from the car. I suppose a similar problem could be happening to this guy.
He should goto device drivers and under usb devices see if the cable is registered properly. If its got the driver warning he should update drivers and see if that fixes it.
#25
Newbie
Thread Starter
Ok so the car is running now, but still never actually got the tune to write to the ecu. It seems to actually run decent unless I stomp on it...i'm suprised, I expected it too run rough and rich, but no. Anyway, I've tried everything to get the cable to connect and all i'm getting is the no vehicle interface and interface close message when I click to write. Really unsure of what else I need to do now to upload my tune, but if any one know's of something I can do I'd appreciate it.
#26
Evolved Member
iTrader: (5)
Ok so the car is running now, but still never actually got the tune to write to the ecu. It seems to actually run decent unless I stomp on it...i'm suprised, I expected it too run rough and rich, but no. Anyway, I've tried everything to get the cable to connect and all i'm getting is the no vehicle interface and interface close message when I click to write. Really unsure of what else I need to do now to upload my tune, but if any one know's of something I can do I'd appreciate it.
#29
Newbie
Thread Starter
It was purchase from evoscan.com. This is the file the tuner at Batlground sent me to purchase the cable. http://evoscan.com/evoscan-gps-obdii...flashing-cable
#30
Evolved Member
iTrader: (5)
It was purchase from evoscan.com. This is the file the tuner at Batlground sent me to purchase the cable. http://evoscan.com/evoscan-gps-obdii...flashing-cable
You'll still be able to edit cars via ecuflash.