Good day guys!!!
i have installed larger injectors (650cc )
i have installed 4b12 intake cam
i have installed aTD04HL (from volvo S60 2.0 turbo 2008)
intercooler and full exhaust also installed
i currently have a piggyback UNICHIP installed and can only get 0.3 bar boost out of her says the tuner he says i need to try get the ecu mapped but he cannot help me with this
the car runs okay but randomly throws an engine light ( error code says torque limit) the error always comes when i get off boost and leave throttle as the dump valve opens
the car runs okay but by no means is it smooth , after the 4b12 intake cam install the idle is a tad rough and will stall sometimes comming off speed as revs seems to drop very fast and ecu cant catch the revs , dips too low and stalls( happens more when hot)
is anyone able to help me with a file i can flash onto this ecu so i can get it tuned to be more smooth? i do not have a 3 bar map sensor installed its still stock one
what can i do guys please help me
car is making 130 Wheel KW and 280 Torque at the moment

Can i pay someone to get my ecu definition file? my tuner does have a tactrix cable im sure if we get a def file he can maybe tune me , how do we do this guys?

contact with me to help you
jmcbrown146@gmail.com