Notices
Lancer Engine Tech Discuss specs/changes to the engine from cams to fully balanced and blueprinted engines!

Question on injectors.

Thread Tools
 
Search this Thread
 
Old Feb 15, 2007 | 07:02 AM
  #1  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
Question on injectors.

Ok, I have just installed my g93 Ported mani, and the gains and throttle response are better than i thought, thanks too rrm for porting it for me, and no thanks to punka$$ A2 Designs..

Well i also have injectors waiting to be installed,but they came with different clips and it looks like I would have to splice some wires, but I DONT KNOW which wires go to where.i am going to school right now, but i'll put pics up later of the injectors.

On another note, is there a How To on an FPR?

Thanks.
Reply
Old Feb 16, 2007 | 12:29 PM
  #2  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
Ok, here is the injector with the clip.wires look identical....


and here are pics of my camo IM.hah.

Reply
Old Feb 16, 2007 | 01:10 PM
  #3  
SLVROZ_03's Avatar
Evolved Member
iTrader: (10)
 
Joined: Mar 2005
Posts: 4,796
Likes: 0
From: Greenville, SC
HUh, why the blue and white color choice with all the red in the bay? What injectors are those?
Reply
Old Feb 16, 2007 | 01:14 PM
  #4  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
hahah, yah i know what u mean about the blue and white, but when i got it from A2 it was all black and when i sent it too rrm to get ported, there were still some black parts, wasnt really polished. and all i had in the garage was blue and white.....

anyway, those are supposedly 275 cc mivec injectors from A2 designs..
Reply
Old Feb 16, 2007 | 02:59 PM
  #5  
Mirage2.0's Avatar
Evolved Member
iTrader: (8)
 
Joined: Nov 2006
Posts: 797
Likes: 0
From: New York
I can get you 275cc injectors for $100. They are the same size as ours just yellow color. From galant or eclipse. Same fitment as oem.
Reply
Old Feb 16, 2007 | 07:49 PM
  #6  
sykou's Avatar
Evolved Member
iTrader: (19)
 
Joined: Aug 2004
Posts: 1,078
Likes: 0
From: Hawaii
they don't fit. I already tried them on. Were outta luck. Those punks!

The ones from YOU KNOW WHO don't fit. Go figure

Last edited by sykou; Feb 16, 2007 at 07:55 PM. Reason: Sorry Mirage2.0 Wasn't referring to you.
Reply
Old Feb 16, 2007 | 08:01 PM
  #7  
sykou's Avatar
Evolved Member
iTrader: (19)
 
Joined: Aug 2004
Posts: 1,078
Likes: 0
From: Hawaii
btw im selling them. best offer gets em.
Reply
Old Feb 16, 2007 | 08:11 PM
  #8  
ambystom01's Avatar
Evolved Member
iTrader: (7)
 
Joined: Sep 2003
Posts: 15,634
Likes: 75
From: Canuckistan
Why do you need upgraded injectors anyways? I mean if you have something like a piggyback I can see doing it (since you could tune it) but otherwise I don't really see a point.
Reply
Old Feb 17, 2007 | 09:48 AM
  #9  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
Originally Posted by Mirage2.0
I can get you 275cc injectors for $100. They are the same size as ours just yellow color. From galant or eclipse. Same fitment as oem.
So, are they different from the ones pictured? If so, would i have to splice some wires for the clips?
Reply
Old Feb 17, 2007 | 09:51 AM
  #10  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
Originally Posted by sykou
they don't fit. I already tried them on. Were outta luck. Those punks!

The ones from YOU KNOW WHO don't fit. Go figure
yah thats what i hear, too long or something. i havent tried it myself.

and as for the piggy, i do have one, but i figured since i have the bored fuel rail, and im, and throttle, might as well throw in injectors and FPR, but dont know how to put on either..so
Reply
Old Feb 17, 2007 | 10:31 AM
  #11  
sdhes's Avatar
Evolving Member
 
Joined: Jul 2005
Posts: 344
Likes: 0
From: Medina, Ohio
According to Rock you really should'nt put an FPR on if you are running a piggy because the piggy is leaning the mix and the FPR is doing the opposite. I had an RPW FPR with a piggy V1 for about five months, and now I dont have either on because my car started running like !!!!. Super bumpy idle with the piggy hooked up, loud exhaust note, bad gas mileage, bad vibration. It still does'nt run quite right to this day and I can't seem to find what I screwed up by running the FPR and Piggy together. Be careful
Reply
Old Feb 17, 2007 | 01:00 PM
  #12  
Mirage2.0's Avatar
Evolved Member
iTrader: (8)
 
Joined: Nov 2006
Posts: 797
Likes: 0
From: New York
Originally Posted by DemisedGabe
So, are they different from the ones pictured? If so, would i have to splice some wires for the clips?
They are exactly the same as our, same size, just different color. 275cc. I have them on my car. '99 or '00 galant (2.4L). From outside they all look the same: mirage, lancer and galant injectors just different color and flow. Trust me on this.
Reply
Old Feb 17, 2007 | 07:55 PM
  #13  
DemisedGabe's Avatar
Thread Starter
Evolving Member
iTrader: (2)
 
Joined: Jul 2005
Posts: 496
Likes: 0
From: Texas
Originally Posted by sdhes
According to Rock you really should'nt put an FPR on if you are running a piggy because the piggy is leaning the mix and the FPR is doing the opposite. I had an RPW FPR with a piggy V1 for about five months, and now I dont have either on because my car started running like !!!!. Super bumpy idle with the piggy hooked up, loud exhaust note, bad gas mileage, bad vibration. It still does'nt run quite right to this day and I can't seem to find what I screwed up by running the FPR and Piggy together. Be careful
well thats good to know, thanks.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
05EV08
Evo Engine / Turbo / Drivetrain
7
May 3, 2016 05:58 PM
BoosttedEVOx
Evo X Engine / Turbo / Drivetrain
3
Aug 8, 2015 02:00 AM
oofastlineoo69
Evo Engine / Turbo / Drivetrain
24
Jan 16, 2011 02:24 PM
dudical26
Water / Methanol Injection / Nitrous Oxide
16
Jun 6, 2007 12:13 PM
nothere
Evo Engine / Turbo / Drivetrain
2
May 30, 2004 07:13 PM




All times are GMT -7. The time now is 08:17 PM.