Since a lot of people haven't dyno'd their Lancer's yet and the Dyno list hasn't been updated recently, I thought we could get a running list of 03-07 Lancers based on whether they're Naturally Aspirated or Turbo'd, SOHC or DOHC. Think of it as a resource in the sense of "Hey, that person has that part? I wonder how they like it or I didn't know they made that part, where'd they get it?" With that said, post up the Year, Model, and Transmission of your car, which category you belong to (N/A, Turbo'd, DOHC N/A, or DOHC Turbo'd), and a list of your Engine Performance Parts. I'll update the list as people start posting


Naturally Aspirated

1)Bones_OZ (2003 OZ A/T) OBX 4-2-1 Header, Custom Bent 2.5" Mid/Test Pipe, 2.25" back custom bent exhaust, FlowMaster 40 Series Muffler, Aluminum Bent Ram Air Intake, Ported Throttle Body

Turbo'd

1)Demon_ni2 (A/T 02 Lancer OZ) - borg s300 83/75, twin tial 38mm mvs, pte 1200cc injectors, e85only, stage 4 rpw full race turbo cam 300/272, ross 9.5:1, pautar rods, arp headstuds, acl rod and main bearings, arp main studs, port n polished head by local machine shop, custom intake manifold, aem fpr, 255pump, boomba 90mm throttlebody, evo MAF, custom flexan 94 motor mounts, copper plugs, stock coils, mishimoto intercooler, and radiator(in the trunk) custom 4 inch exhaust out the front bumper. street tires, 235/65/15 m/t DRs.. track tires, 26x9x15 M/t softies. built automatic, all alto parts, level10 trq converter, custom high flow pump, ipt silonoids. rrm rear sway bar, all poli suspension.

2)Sawulkn (02 OZ 5spd) T3/T4 .60, Tial 38mm WG, Greddy type S bov, custom ramhorn manifold, custom d/p, Ebay N1 exhaust, RRM testpipe, WRX 440cc injectors, Wiseco 8.8:1 pistons, Evo 399 MAF, Evo IC + piping, Ebay halfsize radiator, Impulse Industries engine damper, RRM crank pulley, RRM front strut bar, RRM lower tie bar, RDD rear strut bar, RDD trunk bar, Megan Racing coilovers, 16x7 +25 offset XXR 522, Greddy EBC, Greddy TT, Zeitronix wideband, tuned by me using ECUflash


Naturally Aspirated (DOHC)

1) Midnightkid (A/T 03 Lancer ES) - Port Matched 4G93E DOHC Head, Weapon R Secret Weapon Intake, Weapon R Oil Catch, OEM 501 MAF Sensor, RRM Throttle body, RRM Intake Manifold, RRM Header, RRM Crank Pulley, RRM Motor Mounts, Mishimoto Radiator, Macko Transmission Cooler, Buddy Club Voltage Stabilizer, NGK Spark Plugs and Wires, ARP Head Studs, ARP Main Studs, ACL rod and main bearings, Wiseco 11:1 Pistons (over 20), Speedcorps Forged Rods, 2.25" Custom Catback Exhaust, Megan Racing Coilovers, RRM Front/Rear Strut Bar, Progress rear anti-sway bar

Turbo'd (DOHC)

 

Add... flintstoning it.. id be on that list right now.. lol.. cuz i aint got no motor in the car.. lol

or add my to turbo'd..

Demon_ni2 (A/T 02 Lancer OZ) - borg s300 83/75, twin tial 38mm mvs, pte 1200cc injectors, e85only, stage 4 rpw full race turbo cam 300/272, ross 9.5:1, pautar rods, arp headstuds, acl rod and main bearings, arp main studs, port n polished head by local machine shop, custom intake manifold, aem fpr, 255pump, boomba 90mm throttlebody, evo MAF, custom flexan 94 motor mounts, copper plugs, stock coils, mishimoto intercooler, and radiator(in the trunk) custom 4 inch exhaust out the front bumper. street tires, 235/65/15 m/t DRs.. track tires, 26x9x15 M/t softies. built automatic, all alto parts, level10 trq converter, custom high flow pump, ipt silonoids. rrm rear sway bar, all poli suspension.

 

No worries, I'm in the same boat lol

 

Bones_OZ (2003 OZ A/T) OBX 4-2-1 Header, Custom Bent 2.5" Mid/Test Pipe, 2.25" back custom bent exhaust, FlowMaster 40 Series Muffler, Aluminum Bent Ram Air Intake, Ported Throttle Body.

 

How's the flowmaster sound on there? I've honestly never seen one on any 4 cylinder motor. Smallest motor I've personally known someone having a flowmaster on was a Ford ranger 4.0 and it sounded like **** (stock manifold, cat +high miles) thanks

 

I use to have a flow master and it has a pretty deep sound. It was a axle back and was just a hair louder than my RRM setup now. There's a noticeable in the tones. It did sound good but you could hear it coming from a long way

 

Sounds like ***. Raspy high pitched, Civic sound. I hate it so much. But then again headers -> No cats -> No Resonator -> Flowmaster might be my problem.

 

Sawulkn (02 OZ 5spd) T3/T4 .60, Tial 38mm WG, Greddy type S bov, custom ramhorn manifold, custom d/p, Ebay N1 exhaust, RRM testpipe, WRX 440cc injectors, Wiseco 8.8:1 pistons, Evo 399 MAF, Evo IC + piping, Ebay halfsize radiator, Impulse Industries engine damper, RRM crank pulley, RRM front strut bar, RRM lower tie bar, RDD rear strut bar, RDD trunk bar, Megan Racing coilovers, 16x7 +25 offset XXR 522, Greddy EBC, Greddy TT, Zeitronix wideband, tuned by me using ECUflash