Srt-4 Engine and Tranny swap.
Srt-4 Engine and Tranny swap.
Hello everyone. I have a 2003 oz rally and I was wondering if I would be able to put an srt-4 engine in my car. My buddy just totaled his car (smashed back end, front end perfect) and I thought it would be unique to put his engine in my car. I understand I would have to make special mounts and stuff I just didn't know if the stance is the same or if I would have to make special axles. Any info would help. Thanks.
Take the wiring harness and ecu from the donor car simplifies this--then you just need power to the ecu. As for the other issues a measuring tape and a lot of measurements FIRST would answer a lot of questions. Not a job I would undertake without having done it before-- GL
Trending Topics
Mitsubishi and Chrysler used to be very tight with the latter manufacturing some of the former's models for the USDM, cross referencing of models made around that time and a few years before may prove useful.
The engine and gearbox are oriented the same way, but the intake manifold on the SRT-4 is by the radiator, ie toward the front of the car and opposite to the Lancer.
You'd need to measure well to make sure the engine can actually fit and have sufficient clearance.
Half the fun of such projects is finding the solutions to the problems that arise as you go along.
Take your time and check it out.
The engine and gearbox are oriented the same way, but the intake manifold on the SRT-4 is by the radiator, ie toward the front of the car and opposite to the Lancer.
You'd need to measure well to make sure the engine can actually fit and have sufficient clearance.
Half the fun of such projects is finding the solutions to the problems that arise as you go along.
Take your time and check it out.
Thread
Thread Starter
Forum
Replies
Last Post
FS[Mid-Atlantic]: WV FS/FT 2004 Evo 8 feeler
need_an_evo
For Sale - Part Outs
0
Dec 29, 2015 05:59 PM
Srt-4 Turbo 7
Evo X General
16
May 8, 2010 01:08 PM
i_love_spool
Canadian Forum
47
Nov 13, 2003 08:02 PM




lol
