Notices
Lancer Engine Tech Discuss specs/changes to the engine from cams to fully balanced and blueprinted engines!

Oil light is on when standing still

Thread Tools
 
Search this Thread
 
Old Mar 25, 2004 | 06:35 PM
  #1  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
Oil light is on when standing still

Hey guys

My oil light is on whenever I am standing still or idling. Doesn't matter park or any other gear.

I am currently using valvoline 5W-30 normal oil, not synthetic or anything with a STP oil filter

Does this mean my oil pump is shot? if so where is at and how do I change it?

I don't think this is a faulty sensor otherwise the sensor would be on all the time

Oh yeah the level is fine.

thanks for your help
Reply
Old Mar 25, 2004 | 06:45 PM
  #2  
fkrzo's Avatar
Evolved Member
 
Joined: Jul 2003
Posts: 543
Likes: 0
From: Westchester, NY
To check if your sensor is OK you have to hook up a guage and see if your oil pressure is in check. If its your pump, you have to pull off the oil pan to get to it. I would first try changing the oil to a 10w30 and see if that remedy's the issue.
Reply
Old Mar 25, 2004 | 07:59 PM
  #3  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
Changing to 10W30 shouldn't be too hard to do

How hard is it to hook up an oil pressure gauge? Any brands I should look at, I guess a-pillar here i come
Reply
Old Mar 27, 2004 | 06:11 AM
  #4  
fkrzo's Avatar
Evolved Member
 
Joined: Jul 2003
Posts: 543
Likes: 0
From: Westchester, NY
Not a permanant guage, There should be a way to connect a fitting right over the oil filter (I will check where today). just watch the guage at idle and when you rev it. If it gets to low at idle then its more than likely that your oil is old and to thin or your pump is shot.
Reply
Old Mar 27, 2004 | 02:25 PM
  #5  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
well my oil is like only a week old
Reply
Old Mar 27, 2004 | 06:57 PM
  #6  
fkrzo's Avatar
Evolved Member
 
Joined: Jul 2003
Posts: 543
Likes: 0
From: Westchester, NY
Not meaning anything bad but are you low on oil (like a whole quart).
Reply
Old Mar 28, 2004 | 09:38 AM
  #7  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
I checked my oil like on friday and it was fine, I'll check it again

can I get more info on that pressure gauge that mounts by the oil filter (?)

thanks for all of the help so far
Reply
Old Mar 29, 2004 | 09:18 AM
  #8  
Kontradictions's Avatar
Evolved Member
iTrader: (1)
 
Joined: Oct 2002
Posts: 858
Likes: 0
From: Southern California
i would bump up your oil and see if that works. I run a 20w50, but i have a turbo. Definitly try changing the oil, if it still comes on I would get a check guage to check the pressure like what was mentioned before. An oil pressure gauge is your best friend. Comes in handy all the time! If none of that helps, then take it to the dealer...
Reply
Old Mar 29, 2004 | 02:13 PM
  #9  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
yeah i was thinking of bumping up the oil to at least 10w40

also i wanna do the oil pressure gauge...simple mod but who sells the whole a-pillar pods that are swappable, i don't want to bolt on pods that i have to drill for
Reply
Old Mar 29, 2004 | 03:23 PM
  #10  
fkrzo's Avatar
Evolved Member
 
Joined: Jul 2003
Posts: 543
Likes: 0
From: Westchester, NY
Lancershop, RRM and Autometer.
Reply
Old Mar 29, 2004 | 07:16 PM
  #11  
sadude's Avatar
Thread Starter
Evolving Member
iTrader: (6)
 
Joined: Jan 2004
Posts: 475
Likes: 0
From: Naperville, IL
okay guys...small update

i had recently added in a bottle of some kind of oil cleaner/detergent and looks like it took care of some of the gunk that was probably effecting the oil flow

thanks for everyone's help
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cal1mr
Evo How Tos / Installations
15
Jun 9, 2015 07:19 PM
kenshi3
Evo General
3
Aug 19, 2012 09:51 AM
LGrady31
Evo Engine / Turbo / Drivetrain
3
Oct 3, 2009 04:26 PM
GBAILEY472
Evo Engine / Turbo / Drivetrain
10
Apr 17, 2009 10:16 AM




All times are GMT -7. The time now is 11:25 AM.