ohio-evo

I believe so as the resin is a plastic/ synthetic. Here is the quote from the 1st post

NOTE section it reads : Do not apply on plastic or any other synthetic surfaces.

SLVROZ_03

iTrader: (10)

^^^pt taken.

Tristar

iTrader: (7)

Not true. 05 was the last year for all CF. 06 started the CF wing with abs plastic side pods....

r1elkins

iTrader: (1)

test it on a small area. i think the resign will not react the same as the clear coat.

SLVROZ_03

iTrader: (10)

Good news!!! This stuff works, and works great!!! Doesn't harm the resin/CF at all. Only thing to mention is that you MUST do this as soon as you start to see any deterioration at all in the top coat. The sun actually melted through most of the top/clear coat and even some resin on my spoiler. I could actually feel the CF weave...D@MN! Getting the 6th or 7th coats on tonight after more wet sanding. I'll post pics once I get home...

SLVROZ_03

iTrader: (10)

Here's what you've all been waiting for... PICTURES!!!

SLVROZ_03

iTrader: (10)

...and some more!!!

DRFTKNGG

iTrader: (8)

Ok so it worked. Now what. You need to spray the carbon fiber surface to protect it from the elements.

SLVROZ_03

iTrader: (10)

First, I started with just a 50/50 look at what it used to look like verus what I just removed. Quite the difference already. But then did the entire thing and noticed how it was a little too late to save some of the resin/CF. Some of it had faded pretty badly. But after 6 clear coats, It's back to it's early day glory!!!

Horray for me and my hard work...It really paid off !

Oh, BTW...use gloves and don't get it on your arms. You'll feel the burn for reals!

DRFTKNGG

iTrader: (8)

hit it with some 2000 grit on a block hand sander. Few rubs with some good wax to bring back the shine. Voila!

SLVROZ_03

iTrader: (10)

Hells yeah!

Arithmetic

iTrader: (9)

Intresting, good post.

SLVROZ_03

iTrader: (10)

Thanks, I was hoping this would give other owners the chance to fix their similiar problems for under $15. Thought about doing a DIY How-To, but if you can read directions you can do this...

TTP Engineering

iTrader: (465)

You are correct.

revolt4revolver

iTrader: (2)

so what clearcoat did u paint it with? more rattle can???

edit also did u reclear the bottom too? the whole thing? did u spray the bottom with peeler?