Front of car:
Front turn signal light: 21watts bulb: WY21W
Head light, high beam: 60watts bulb: 9005 HB3
Head light, low beam: (halogen bulb) 51watts bulb: 9006 HB4
front foglight: 55watts bulb: H11
Front side marker and parking light: 5watts bulb: 168/194
Side turn signal light: 5watts bulb: 168/194


REAR of car:
High mounted stop light: Led
License plate: 5watts bulb: 168/194
back up light: 21watts bulb: 7440
tail light: 5watts bulb: W5W
tail and stop light: 21/5watts bulb 7443
rear turn signal: 21watts bulb: 7440
rear sidemarker: 5watts bulb: W5W


INSIDE CAR
trunk area: 5watts bulb:----- 3022
dome light: 8watts bulb:----- 3022

 

I Love My Piaa's I Recommend Sooo Much, Ps Anyone Changed The Fogs Up?

 

Has anyone considered sticking the side turn signal assembly (the signal closest to the doors) in the oven and baking it like you would with the headlight assembly? Only thing is that you would be baking it with a bulb inside but I don't think that would make a difference.

Also, has anyone replaced the dome and trunk bulbs with LEDs or any other differently colored bulb? If so, what are the specifications (socket type, etc) besides wattage, which is listed already.

Thanks in advance.

 

I have replaced the front marker lights, the liscence plate lights and the reverse lights all with LED's and have no isses.

 

For anyone who's replaced their lowbeam headlight bulbs, perhaps you can help me out here? I cant for the life of me figure how to reach the back of the bulb assembly to actually unscrew and remove it. I'm probably missing something very obvious here but cant hurt to ask.

 

Open your manual, and it shows you how to remove the large plastic cover and the intake tube that is hiding where you need to get to.....It is just a serious of clips, just be careful.

 

Unfortunately I havent found this section covering removing the cover & intake or maybe I just missed it. All I found was the section showing just how to unscrew the bulb and thats it.

I'll check again though, thanks for the info bro

 

uhhhhhhhh dont try to bake **** on this car until more parts are made available

 

good point but yeah no worries man, like i said - for now all i might try is a straight up bulb replacement.

 

what does baking do?

 

Well, since it is sealed so the bulb can be protected from the weather, baking it would soften the sealant and you would be able to take the cover apart to access the bulb. Many have done it to their headlight assembly in other cars to install angel eyes and such.

Again, I am talking about the side turn signal, not the front side marker inside the headlight.

 

are there any good after-market headlights out yet?

 

Nope.

 

Does anyone know where I can find the light bulbs for the side turn signal lights? It looks ugly yellow lol




JuJu.

 

What kind of bulbs do you guys recommend for the headlights? Are the Sylyania bulbs the best?