i believe the ashtray light is the same as the license plate ones. wont know for sure till this sunday when i finally get a day off and i can finish the remote start in my car and add this adapter i found that should be able to take the drls and run em at 12v so the hid's work fine. if nobody posts anything by sunday then ill let you guys know

 

The factory Sylvania low-beam bulb I pulled out is a 55 watt bulb. I'm not sure why Mitsubishi lists the bulb as a 51watt. I replaced my low beam bulbs (#9006) with the Sylvania cool-blue bulbs, and I'm happy.

 

I have led trunk and dome lights. Not wimpy stuff either.

 

i have some hid lights..only problem is the wattage is 100watts is that wayy too much for the lancers? if i could turn the daytime runnings lights off i would for sure put them in..but having them on all the time i dont know if that would be good for the car..

but in my old avenger it had a 60watt stock and i put 100watts and iddnt have any problems but that was 8 years ago..

 

I want to get the ashtray light replace with something brighter so badly, do you guys know what kinda bulb that is? And can someone tell me where the dome light is in the car?

 

is there any LED bulbs sold in stores that i can replace for my truck, dome, license plates, and tail lights?

also, are the LED watts the same as the factory watts? don't wanna melt anything. I want brighter lights basically. hope someone can help.

 

Yeah i went to Advanced Auto Parts today and they said they didnt have any interior light "upgrades". Where can i get these LEDs?

 

I got the Sylvania Silverstar ULTRAs for my High & Low beams,.. and I absolutely LOVE them!!! When they say 20% increase, they MEAN IT!!! The lows I got from a local store $50-ish a pair,.. and the Highs I got off of e-bay for $15 cheaper.

The Fog lights are a NEW model with the H11's, and Sylvania has NOT yet released their new model for those yet, but you bet,... soon as they do I'll have a set.

When I 1st installed my Low beams, I installed ONE only to see the difference on the wall of the store at dusk/dark.
The factory bulbs have a sorta yellowish dirty look,.. the ULTRAs were definately whiter,.. & much cleaner.

 

get nokya artic white stage 2 bulbs with the heavy duty plug and play harnesses. i have them in my lows, highs and fogs and they look amazing and are so much brighter.

 

just replaced my license plate lights with bright white bulbs....will see how they look tonite....cost me 8 bucks....also will be doing my 8000k hids this week.....i will also be doingmy red underglow and red interior neons......blue car and red neon will look crazy

 

you can get LED bulbs for certain lights. EASY:

STEP 1: Take the light bulb(s) out
STEP 2: Go to an auto parts store and say, "I want these, but in LED."
STEP 3: Done

 

I want to put 80W bulbs into my low beams with heavy duty wiring/harness but am concerned whether the plastic housing can handle the extra heat emitted from the 80 watts. Anyone know if the 08/09 Lancer can handle that extra heat?

 

so streamline808 did u figure out if the ashtray lights are the same as the license place ones?

 

i have 100w bulbs on my fogs and they've been fine for 3 months now (12,000 miles). So i dont think wattage is a big issue unless you go like 200w.

 

just replaced every single bulb in my car aside from the ones behind the dash. PIAA 4100k highs/lows, PIAA 2500k Fogs, and L.E.D. replacement for every other incandescent bulb on the car. looks SICK. pics once i find a digital camera.