you can also use the ECU, rpm limit goes to 7200rpm... if you use the mirage ecu you have to change some wires to be able to get the tachometer to work... also it doesnt hold up the minium of the car... but is fun for racing..

 

the 4g94s power drops off at 5500rpms. So if you got the mirage ecu and installed it, there is no use for that high rpm range. youwill just loss power in the range from 5500-7200rpm

 

Does anyone know the part number on the Lancer Camshaft gear and the 4G93 camshaft gear?

Or are they the exact same part number?

 

how about internals? I see nothing about the internals and whether or not they work.

 

okay i been looking online and stuff for this kind of information for a little while now. my Q: is the stock G93 stock intake manifold bore vs G94 stock manifold bore size because if the G93 had a bigger bore i was just going to go to the junk yard to get on out and swap it into my G94 motor so i don't have my daily driver out of service too long..

 

The 4G93 intake manifold flows much better than the stock 4G94 IM.. you will have to extend some lines..... i need to get a mirage exaust header too for my lancer... i paid 70$ for my mani from the pyp yard localy on one of their 1/2 sales

 

wow 70 thats way to much i got mine for around 30

 

now u tell me

 

should of looked on their site for the prices and that was on a not on a half off day

 

okay one more question before i go and but a G93 mani i'm assuming that the fuel rail sensors and vacums lines all line up?

 

Hello

Please help me

I have a 1999 Mitsubishi Lancer GL 1.3, and someone destroyed my left side view mirror on the parking lot today.
I would like to find a replacement, but official importer doesn't carry those anymore, and only replacement side view mirrors i could find at various online retailers (such as ebay) were for Mirage

I would like to know if i can fit the Mirage side view mirror onto my Lancer. Is the mount compatible? The mirrors and the plastic triangle thingy look the same.

My Lancer looks like this:
http://imganuncios.mitula.net/1999_m...5880597380.jpg

This is a Mirage made in same year:
http://www.justcar.org/wp-content/up...hi-Mirage1.jpg

The side view mirror i could find online looks just like the one i have (sort of... it's hanging from my left door)
http://cdn3.iofferphoto.com/img/item...0/565/JUFu.jpg

 

I didn't see this on here but will the axles work on the lancer as well as the hub??

 

I'm looking forward to go for a somewhat mild project and for the engine I was wondering if I could use the G93T parts on my G94. These I'd like to know on.

Intake & exhaust manifolds with the Turbo components and the DOHC Head. I'm sure that such Hot-Rod work could be simple. Is it and if so, WHERE to get it from?

No junkyards around me (10mi radius) seemed passionate to look into their inventory, they just turn me down.

One more thing: ANY Mirage owner that replaces their model badge with a Lancer... Is cool with me.

 

Will changing by pulley on my lancer to an underdrive help on power

 

yeah, a little bit, if you feel the difference i'd be surprised...