check out my new wide band o2
Oct 21, 2003, 12:32 PM
#2
Evolving Member
Thread Starter
Join Date: Jul 2002
Location: Utah
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Oct 21, 2003, 12:35 PM
#5
Evolved Member
iTrader: (6)
Join Date: Aug 2002
Location: nu jeru
Posts: 1,439
Likes: 0
Received 0 Likes
on
0 Posts
thats hot.. i dont know what im supposed to be looking at in the first pic, but is that aluminum foil i see? 
and as for the afc, did you tune that yourself or had a shop do it?
and as for the afc, did you tune that yourself or had a shop do it?
Oct 21, 2003, 12:35 PM
#6
Evolved Member
iTrader: (3)
Join Date: Apr 2002
Location: Somerset, KY
Posts: 1,509
Likes: 0
Received 0 Likes
on
0 Posts
Nice!!!! Does the wideband hook back into the ecu using the stock sensor wires or what? Looks like $500 for the set-up?
Last edited by uranium9v; Oct 21, 2003 at 12:38 PM.
Trending Topics
Oct 21, 2003, 12:39 PM
#8
Evolving Member
Thread Starter
Join Date: Jul 2002
Location: Utah
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
the first pic is the actual wide band o2 sensor the others with the green read out is the air fuel ratio, yes thats aluminum foil........makes for a fine quality heat sheild :P. i think that it might have a hook up to go to the stock ecu but right now im just using it stand alone
Oct 21, 2003, 01:33 PM
#11
Evolved Member
iTrader: (5)
Join Date: Dec 2002
Location: Lake Elsinore, CA
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
what type of car is this cause the top picture looks like the RRM turbo kit (intercooled) yet the inside pictures definitly dont look like a lancer unless that is what the dash looks like in an es, if so man am i glad i got the oz.
either way nice setup!!!!!!
either way nice setup!!!!!!
Oct 21, 2003, 04:52 PM
#14
Evolving Member
Thread Starter
Join Date: Jul 2002
Location: Utah
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
,
yea i installed it myself (minus the welding)
i bought it off a tuner shop here that used
it on their race car for a little bit.
i got it for $600 and the welding was free
its i pricey unit, to buy the sensor and display unit
and the controller was 900 new
but its a high quality unit
i believe road race uses it on some of their race
cars if im not mistaken, at least thats what the
manufacture was sayin
i bought it off a tuner shop here that used
it on their race car for a little bit.
i got it for $600 and the welding was free
its i pricey unit, to buy the sensor and display unit
and the controller was 900 new
but its a high quality unit
i believe road race uses it on some of their race
cars if im not mistaken, at least thats what the
manufacture was sayin
