Lowered 02-07 Lancers. Post your pics!
Im slammed on Ksport control pros and had credit card clearance in the rear and front prior to fender roll. (Would not suggest doing the same if you value your paint LMFAO)
Only pic I have at the moment is my profile pic due to being at work.
Only pic I have at the moment is my profile pic due to being at work.
any *** shot. I want to see the DC exhaust. I didn't know they made one for our car? I can only guess its crazy loud.
I have an 04 ES that I'm planning on stancing out, I'll get some pics up when I'm at home but I'm wanting to be running the Tein Basic Coilover set up with an agressive camber front and back, with maybe some +30 or +25 wheels in 16. Can anyone help me figure it out?
as a reference for you this is my car,
http://www.flickr.com/photos/54188209@N08/8491233722/
http://www.flickr.com/photos/54188209@N08/8491233710/
as you can see the wheels are pretty much flush with the fenders, my wheel specs are 16x8 +26 on 195/40 tires and coilovers are maxed out in the rear but i still have like half an inch more i can go lower in the front. hope this helps you
From my experience our cars cannot achieve aggressive camber because coilovers made for our car do not drop low enough and camber kits are not available but it isnt impossible to do. 16 and 17in wheels with a width of 8-9inches are what our cars can fit however if you went with 9in widths your fenders need to be rolled and pulled. Also regarding to offset, the lower the offset the more the wheel will poke so keep that in mind. A wheel 16x8 +25 will sit flush with your fenders, so if you want something more aggressive choose a wheel with an lower offset
as a reference for you this is my car,


as you can see the wheels are pretty much flush with the fenders, my wheel specs are 16x8 +26 on 195/40 tires and coilovers are maxed out in the rear but i still have like half an inch more i can go lower in the front. hope this helps you
as a reference for you this is my car,


as you can see the wheels are pretty much flush with the fenders, my wheel specs are 16x8 +26 on 195/40 tires and coilovers are maxed out in the rear but i still have like half an inch more i can go lower in the front. hope this helps you

Haven't been active on this site but here's my 04' ES sitting on S-techs with 17 in SSR rims. Getting BC coilovers next month and hopefully a set of 16x8 or 16x8.5.
Last edited by aLdReEeNo; Mar 6, 2013 at 06:13 PM. Reason: Wrong link
If I were you I would not buy springs, they do not drop the car that much from stock height. Try looking into raceland coilovers, they might have a set for our cars but I'm not to sure. Yes 15x7 +25 will fit, my previous set up was 15x8 +25. Save some money and buy coils
Where did you get those eye lids?? they're pretty illmatic =]
Last edited by NiteKid22; Mar 6, 2013 at 08:35 PM.
Yeah I really like the slammerd look, but where I live won't allow me to get that low without some real damage to the underside. for now I kinda want to have that "rally car" look just without so much wheel gap, I really like the look of the ES above my comment, would I be able to close up some wheel gap with 16x7 with beefy tires? I'm talking like 195/55/16? I don't want to run too low of a profile to keep the car from looking rice.
Where did you get those eye lids?? they're pretty illmatic =]
Where did you get those eye lids?? they're pretty illmatic =]



