After reading this thread I have a question.

I just got a new engine from a 2004 Lancer to put in my 2002 Lancer. Is there going to be a problem matching up the clutch and tranny when I take it to the shop to get installed?

Getting very confused reading the guys post about the 03 4g94 and v1 04 tranny.

 

02-03 trannys have an internal slave. if you use an 04 tranny you need the clutch fork and throwout bearing for the 04. the pressure plat and clutch disc is the same. I have an 06 tranny in my 03 oz