How do i get the Grey Plastic (OZ) pieces off from behind the seatbelts?
i can get it to pop off a little but how do i remove the belt to get the piece off for painting?

 

I would assume you can unbolt everything

 

...? i don't think that would work. seeing there are no visible bolts. the piece is held on by the little seat belt thingy... (the adjustable plastic piece)

 

ok the seatbelt thing splits in half. there is a bolt behind it i believe 18mm but could be wrong. once you take that out then the seatbelt comes off.

Next you will need to pull the black peice out alittle (the bottom part of the b pillar) it just takes some mussel to split it and work it.

next take the weather stripping off the door jam around the plastic peice that you want to remove and it should slip up alittle and pop out.

repeat in reverse order to install.

just did it the other day to put em back in so if you have any q's let me know

 

i have the black pieces off, but i can't seem to get the grey piece, i have got it past the weather stipping already, but i can't find the bolt holding the seat belt up there. ( i know there are 2 by the black piece, one behind and one coved b/c the carpet....)

 

got it off, just realized what you ment.... wow that was a lot easier thanx for your help!