Evolution X Console & Dash Parts w/ Lids
#61
Big thanks to Russell for all of his help sorting out the part numbers that I needed to put this setup into my '10 Evo SE, which has the GSR crosshatch pattern but the SST tranny, and comes with the covered cupholders already. We knew that we just needed the setup from the Ralliart Sport Back, but it was hard to find the part number for the shifter surround. Your list helped a lot, and proved to be correct.
User Blayne on EvoXForums compiled and posted this great list of the part numbers by transmission and trim pattern: http://tinyurl.com/3cpyop5
Note that "8041A040XA Console Trim/Cup Holder" is not needed if your car came with the covered cupholder initially, which I believe should be on all '09+ cars. Also, you don't have to buy "8040A029 Plug Panel" if you don't mind your aux plugs having the cover over them inside of the cubby.
If anyone is ordering this setup, then I'd suggest also relocating the AWC switch up to the blank on the dash and replacing that set of blanks with the handy little cubby from the base cars, part number 8011A266XA: https://www.evolutionm.net/forums/09...tton-dash.html.
User Blayne on EvoXForums compiled and posted this great list of the part numbers by transmission and trim pattern: http://tinyurl.com/3cpyop5
Originally Posted by blayne
SST transmission, crosshatch pattern:
8010A189XA HVAC Trim
8040A032XA Cubby with lids #1
8010A167XA Cubby with lids #2
8015A095XA Shifter Panel
8011A883 Crome ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
SST transmission, solid black pattern:
8010A189XA HVAC Trim
8040A032HA Cubby with lids #1
8010A167HA Cubby with lids #2
8015A095HA Shifter Panel
8011A883 Crome ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
Manual transmission, crosshatch pattern:
8010A189XA HVAC Trim
8040A032XA Cubby with lids #1
8010A167XA Cubby with lids #2
8015A094XA Shifter Panel
8011A730HA Ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
8015A090XA (optional) - Shifter boot replacement
Manual transmission, solid black pattern:
8010A189XA HVAC Trim
8040A032HA Cubby with lids #1
8010A167HA Cubby with lids #2
8015A094HA Shifter Panel
8011A730HA Ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
8015A090XA (optional) - Shifter boot replacement
8010A189XA HVAC Trim
8040A032XA Cubby with lids #1
8010A167XA Cubby with lids #2
8015A095XA Shifter Panel
8011A883 Crome ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
SST transmission, solid black pattern:
8010A189XA HVAC Trim
8040A032HA Cubby with lids #1
8010A167HA Cubby with lids #2
8015A095HA Shifter Panel
8011A883 Crome ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
Manual transmission, crosshatch pattern:
8010A189XA HVAC Trim
8040A032XA Cubby with lids #1
8010A167XA Cubby with lids #2
8015A094XA Shifter Panel
8011A730HA Ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
8015A090XA (optional) - Shifter boot replacement
Manual transmission, solid black pattern:
8010A189XA HVAC Trim
8040A032HA Cubby with lids #1
8010A167HA Cubby with lids #2
8015A094HA Shifter Panel
8011A730HA Ring inside shifter panel
8041A040XA Console Trim/Cup Holder
8040A029 Plug Panel
8015A090XA (optional) - Shifter boot replacement
If anyone is ordering this setup, then I'd suggest also relocating the AWC switch up to the blank on the dash and replacing that set of blanks with the handy little cubby from the base cars, part number 8011A266XA: https://www.evolutionm.net/forums/09...tton-dash.html.
#66
This cubby upgrade seem more complicated than a tax audit!
read through the thread still not sure exactly what i would need...
I have a 2010 Evo SE, SST Trans with the CF Trim, looking to see exactly what pieces I would need and what the price would be.
Thank you!!
read through the thread still not sure exactly what i would need...
I have a 2010 Evo SE, SST Trans with the CF Trim, looking to see exactly what pieces I would need and what the price would be.
Thank you!!
Thread
Thread Starter
Forum
Replies
Last Post
Spoolin4g63
Vendor Service / Parts / Tuning Review
4
Aug 4, 2017 07:57 PM
Yota Eater
For Sale - Interior / Exterior / Sound / Styling
6
Jun 12, 2017 11:18 AM
FS[Northeast]: RS Center Console
gsrboi80
For Sale - Interior / Exterior / Sound / Styling
11
Nov 6, 2016 11:17 PM
Revolver Ocelot
Evo General
12
Mar 8, 2016 09:18 AM