Binary brackets = play in slider?
Thread Starter
Evolved Member
iTrader: (20)
Joined: Mar 2009
Posts: 2,389
Likes: 11
From: Big city, Bright lights
Binary brackets = play in slider?
this is not bashing the product AT ALL, i like it, and am still getting used to it, but its nice to finally have my shins not hitting the lower dash cover.
I installed the brackets earlier this week, and didnt drive much for a few days. today i went out to bed in some new pads and found that the slider now seems to have 1/4" (probably even less) of play in it aka i can shift the seat back and forth a tad with my butt, or if i accel hard it goes back, then a bedding stop and i click forward.
anyone else experience this?
is this due to the removal of the little rubber bumpers at the front of the rails?
I installed the brackets earlier this week, and didnt drive much for a few days. today i went out to bed in some new pads and found that the slider now seems to have 1/4" (probably even less) of play in it aka i can shift the seat back and forth a tad with my butt, or if i accel hard it goes back, then a bedding stop and i click forward.
anyone else experience this?
is this due to the removal of the little rubber bumpers at the front of the rails?
I just installed them too and I too have this issue. I noticed that I had a slight movement even before the brackets, but the new seat position seems to have accentuate it.
Maybe Jared can chime in here and see if there is a way to fix this.
Bren
Maybe Jared can chime in here and see if there is a way to fix this.
Bren
i installed mine a few weeks ago... no issues. my bar doesnt hit either... have you tried pulling the seats and tightening the bracket to seat mounting bolts? they are pretty high grade bolts dont be afraid to put some real torque on them...
Trending Topics
Here are the directions:
http://www.binaryeng.com/blog/index..../seat-brackets
You definitely need to bend the adjustment lever. I had similar issues and bending the lever fixed it. In certain seating positions it will make contact with the floor and not let the sliders lock.
http://www.binaryeng.com/blog/index..../seat-brackets
You definitely need to bend the adjustment lever. I had similar issues and bending the lever fixed it. In certain seating positions it will make contact with the floor and not let the sliders lock.
Thread Starter
Evolved Member
iTrader: (20)
Joined: Mar 2009
Posts: 2,389
Likes: 11
From: Big city, Bright lights

Here are the directions:
http://www.binaryeng.com/blog/index..../seat-brackets
You definitely need to bend the adjustment lever. I had similar issues and bending the lever fixed it. In certain seating positions it will make contact with the floor and not let the sliders lock.
http://www.binaryeng.com/blog/index..../seat-brackets
You definitely need to bend the adjustment lever. I had similar issues and bending the lever fixed it. In certain seating positions it will make contact with the floor and not let the sliders lock.
the seating is awesome tho, i am much more comfortable now!
Thread
Thread Starter
Forum
Replies
Last Post
2006GSR
Evo Engine / Turbo / Drivetrain
18
Jun 16, 2012 09:34 PM




