hey goofy,

did you disable it then? via ecuflash?

 

It's on my todo list this weekend.

Follow the steps here: https://www.evolutionm.net/forums/ev...ut-serial.html

but obviously don't wire up your wideband unless you want to (I am torn honestly since my innovate works nicely with the tactrix dongle... but I'd not need the serial port for other things I'm doing.

 

hmm... he says that he still has a CEL. Crap that's what I'm trying to avoid!

 

hmm... actually the post from a week or two ago says you CAN disable teh DTC that pops up:

 

yep..i did see that thread..some of them popped a cel still..going to do more research.. thanks!

 

i just made my cel fix yesterday, installed the t1r resonated tp and so far so good

 

ya, I'm slowly but surely replacing the UR stuff with AMS. Got dibs on an AMS test pipe with the fix from a guy in SA who's coming up to Cobb next week

Maybe that will help too.

 

Be careful with this code as not all ROM's have been checked to reflect the address. Check the DTC disable thread to see if your ROM ID has been checked.

BTW, I have a UR test pipe with a bunch of miles on it, and I have yet to get the CEL.

 

I go about a week with no CEL (got inspected w00t!) and then I get it 1-3x a day. It's a real pain in the ***.

 

^^ i got inspected too..lol the cel wasn't popping out yet at that time (good for me lol)..after 4k miles and when i installed a new part, it popped out..i might try the angled after 2 weeks or so if there's no fix for my rom id by that time..

 

found a brass plug at elliots hardware that worked. $3 and it fit. 3/8" pipe plug.

 

Reggie,

anthony to, hehe..did you get the elbow cel fix? locally? let me know! thanks

 

Kevin, I didnt know you could do that, I am impressed.

 

I pulled the rear o2 and wired up my wideband into it's input to the ECU (per the thread above). It's logging via the ECU but it's not quite the same values as what the serial output is logging. Many reasons why that could be, but I'll just continue to log with the serial (since it plugs into the dongle). For those of you with AEM widebands I recommend you do the ecu logging... way easier!

 

do you have a link where you bought those? i messaged the ebay guys that was linked here..it's been days and he hasn't replied yet..