jer didn't have good luck doin his rears, good thing he didn't care. i had to stop him from using a dremel and sawzall!

i'll find out for ya. what's your name? i'm Paul.

 

My name is brian......i dont think i need to go a whole lot...the rotas on there now have about a finger width of clearance and they are +29 offset....the rears on the new wheels are +26 so i think i might be just a bit short....

 

150 isnt bad.. they sell them on tirerack for 260..http://www.tirerack.com/accessories/detail.jsp?ID=52 i would really like to have one. I could use it for both my cars

 

Details? Pm me if you don't want to post them here.

I went for the touchless wash tonight. It was too dark to really get a good look, but I think it looks good. I'll update tomorrow.

 

nice to meet ya! i texted him and it's a go. when are you doing this?

 

https://www.evolutionm.net/forums/sa...8x10-35-a.html

 

you def need some wider tires on that size rim, 235 way to skinny for 10" wide wheel. unless there used for all season driving. seems like a waste of 2". not trying to be a *ick, just wondering.

 

Well actually its the fronts that are really a *****. It's because the lip is so small to begin with that its hard to bend it without bending the alluminum fenders. Also, i'll assume you understand you will need a heat gun also? I have one if you need to borrow it!

So what size tire are you plan on running? There are more issue you will run into then just the lip if your going big. Like the seams and the bolt to hold on the rear bumper. I had to cut off some of the tab for the rear bumper to make my wheels work. Now i am running 285's so it might not be a big deal if your going to run a 265

 

Im running 265/35s brotha.. look closer

 

looks like 265's to me Paul. . And those are still small IMO. Heck run some 295's or 315 if you want a more aggesive look. Or just go buy some spacer!

 

id rather not with the tires.. I have spacers I threw on(no spacers in the pics) but im going with something like a +15 most likely

 

my bad like jer said still too small

 

thanks for the input buddy but 90 percent of the people running this size wheel are going with a 265.

 

i think i should be ok on the fronts...the way the car sits now i plenty of clearance...i was thinking either 255/35 or 265 35......... probably a couple of weeks....the wheels should be here in a week then i have to get the tires mounted....

 

255's shouldn't be a problem. my summer tires are 255/45/17 and they fit nicely with the lowering springs. any larger though and you will definitely need to do some convincing of the fenders.