PCD: 2013-2014 Till We Break It Edition
I can't buy guns in NJ, lol. I went to Dick's over the weekend, and they only had a few boxes of 12ga rounds left. We go through 100 rounds per person each visit to shoot sporting clays. Used to get rounds on discount. No longer!
It's in Hackensack right off Route 80.
I'd want to pull all the main components.
Motor (turbo manifold, turbo)
Transmission (trans mount, harness, shifter cables, shift box, etc)
Transfer Case
Rear Differential (maybe I could find a buyer in Aussie land that wants my entire rear end for a race car that wants to ditch ACD.
Exhaust
Front suspension
Drop the rear subframe down and put the car on stands.
Brembo's
Brake lines
Clutch Master Cylinder
Trunk (can come off later)
Doors (can come off later)
Etc
I pay you in food, and sell parts for $$$.
Pants optional, speedo's necessary.
CTD Cold Strip Domination
-Jalal
I'd want to pull all the main components.
Motor (turbo manifold, turbo)
Transmission (trans mount, harness, shifter cables, shift box, etc)
Transfer Case
Rear Differential (maybe I could find a buyer in Aussie land that wants my entire rear end for a race car that wants to ditch ACD.
Exhaust
Front suspension
Drop the rear subframe down and put the car on stands.
Brembo's
Brake lines
Clutch Master Cylinder
Trunk (can come off later)
Doors (can come off later)
Etc
I pay you in food, and sell parts for $$$.
Pants optional, speedo's necessary.
CTD Cold Strip Domination
-Jalal
Evolved Member
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
Jalal,
we have never met but I am sorry about what happened with your car.
I am looking for any lightweight parts you might have, specifically the mustache bar and/or the lower front bar that holds the motor mount. If you have anything that is light and for sale let me know. I also need the plastic piece that goes between steering wheel and air bag. It is a spring loaded piece that controls the turn signal. I broke mine when messing around with steering wheel. Also looking for a center console that fits in my car right. Now that I am running 5 speed mine does not fit....
good luck with the part out!
we have never met but I am sorry about what happened with your car.
I am looking for any lightweight parts you might have, specifically the mustache bar and/or the lower front bar that holds the motor mount. If you have anything that is light and for sale let me know. I also need the plastic piece that goes between steering wheel and air bag. It is a spring loaded piece that controls the turn signal. I broke mine when messing around with steering wheel. Also looking for a center console that fits in my car right. Now that I am running 5 speed mine does not fit....
good luck with the part out!
^ not finder liner cause that ish be making noise errtime i turn right. it only does it under certain conditions. i can even hear it sometimes getting off highway ramp. finder liner would have worn the whole way through by now. **** been doing this for at least 10 track days since i start hearing it, and it's getting louder.
Probably wheel bearing.. Even though you replaced recently maybe you didn't seat the bearing correctly when you did it and it is wearing prematurely.
Evolved Member
Joined: Apr 2008
Posts: 1,235
Likes: 4
From: PA
I had a bad wheel bearing in both the corolla and my neon that made a loud roaring sound when turning like that. Or maybe it was the rear diff in those cars. I heard the rear diff in the neons and corollas suck.
The front wheels bearing was brand new oem and has less then 500 miles on when I toke that track video. There's no way it wore that quick. Also the noise level didnt change one bit with the new front wheel bearing. I'm going to replace rear bearing as Aaron mentioned, he said his was bad and made noise.