gawddammn.

-Jalal

 

Sup bishes?

 

Post fail...

 

my car is in a 10x20 foot unit.

I'm thinking we could pull apart the whole front end off and dump the garbage and go from there.

CTD Strip Meet.

-Jalal

 

Where is it located??

Do you have a list of parts you want to pull??

 

In for CTD strip party for discounted parts. Pants optional.

 

I'm in for CTD strip meet. But if you're recruiting from here, it'll have to be called PCD Strip Domination.

Having strippers involved only makes it better.

 

Edit: Having male Filipino escaped poolboy strippers only makes it better.

 

Here's that last few year's roster. This is the only pic I could find that wont get me arrested.

 

Turn up the radio Bish!

Seriously sounds like plastic rubbing on the wheel. Why don't chu get some normal size ish that don't rub.

 

noise started the end of last year. i ran 3 different tire size for 2 years with out noise. it's not plastic rubbing cause i don't see any sign of rubbing on the tires. and the noise is getting louder, so it's a wear component that's rotating. and it only makes noise on right turns, which is from all the clockwise track that we do.

i'm thinking front axles, since it's the one that's associated to steering angle. or one of the diff since it could be when the inside and outside wheels rotate at different speed when turning. or could be wheel bearing when theres force on them during turns, i replaced the front one but not the rear one. cant imagine that the rear wheel bearing would go bad before the front.

 

It's in Hackensack right off Route 80.

I'd want to pull all the main components.

Motor (turbo manifold, turbo)
Transmission (trans mount, harness, shifter cables, shift box, etc)
Transfer Case
Rear Differential (maybe I could find a buyer in Aussie land that wants my entire rear end for a race car that wants to ditch ACD.
Exhaust

Front suspension
Drop the rear subframe down and put the car on stands.
Brembo's
Brake lines
Clutch Master Cylinder
Trunk (can come off later)
Doors (can come off later)

Etc
I pay you in food, and sell parts for $$$.
Pants optional, speedo's necessary.

CTD Cold Strip Domination

-Jalal

 

well it does take A LOT of work to make a miata straight...

 

A lot of you are in the Philly area I think. Here's a map from Philly to Hackensack just to give you all an idea.

-Jalal

 

LMAO!!!

-Jalal