I am having torque freaks install and tune a meth kit in my car on wednesday. any idea of what I should expect for power with my current mods? I was thinking around 350whp...maybe a little more with the larger hotside

 

that's cool i'm doing the same thing. I'm having a different shop install the meth, but I plan to get the car tuned at torque freaks. I would appreciate knowing how much boost you are going to run on pump gas though.

let us know power figures and boost levels after your car is tuned.. please

 

No problem. As soon as I have the numbers I will post them.

 

Good luck!!!

 

yuh, lemme know how the install goes, i'm thinking of this as well...

i'm curious to see results.

keep us updated!

 

you should probably be making towards 370 or so is my guestimate if you use meth at 26psi

 

Tosh you do not need meth!Al you need it's few mods and you'll be and the 12'0 or 11'. Remember just like someones signature says meth makes the EVOVIII forget it's not a IX or some like that, you know what I mean.

 

370-380

 

I have basically the same mods except I have 272's. When I installed my fmic and meth I jumped about 50hp and 80tq at AMS

 

Looking forward to doing the install and tune on your car! I won't predict numbers, but frankly bang for the buck, methanol injection is the biggest power adder IMHO. But heck.....its our kit so I guess I'm a bit biased towards it

 

Sounds good as we are always ready to tune..especially with the METH baby!!!. Out of curiosity who do you have doing the install? Also what kit are you going with? What fail safe will you be using?

 

Your car is done!!! I'll let you post the #

 

I have Mike's permission to post up the dyno results. Here it is:

Came in running 12 psi with 244HP 215TQ, and left running 321HP 330TQ with 25 psi peak then tapering off to about 20 psi. Time for a turbo upgrade Mike! I'll let him post up about his impressions of the overall kit and performance. Although we did not meet the 350HP number he was hoping to hit, a 77HP/115TQ increase with just a methanol injection kit added on exceeds our standards. We typically expect 50HP gains with the standard Torquefreak Methanol injection kit.

Mark

 

what kind of fail safes do you have or set up with your kits?

 

Why did you run only 12PSI when you got in? Do you have cams? Cause 330WHP is a pump gas number on 05's with cams.