Hey guys! I just got a 3.5inch core intercooler with licp/uicp and an intake.. My car studders a whole lot and doesn't idle right. It also shuts down when I'm on the accelerator and just let off. It doesn't run right at all!!! I need some help... What would cause this to happen?? Does anyone know what might this problem be? Please Help!!!

 

it sounds like ur have a leak... what kind of clamps do u have... T bolt or regular ones..?

 

sounds like possibly a maf problem..what kind of intake?

 

I actually have the t bolts on there... Looked for leaks, but found nothing....

 

I can't remember off the top of my head... It's at a buddies house right now... He ordered the intake for me... What kind of problem with the MAF are you talking about?

 

i dont know then...

 

possibly dirty or damaged? that would cause a bad idle and stalling...usually it would trip a code tho..theres no engine light on?

 

Nup... Throwing no kind of code.. however my SRS light did come on....

 

put right BOV in postion right flow air direction? and MAF sensor plug in?

i can help you ya if u need.

Missed any Couple tight.... I suggest best is T-bolt Clamps instead cheapo screw clamps...

 

I agree, check the bov and make sure you plugged the maf in. Simple mistake......

 

BOV recirced? mine is not but Lucas tuned as best as he could to comp with rough idle. If you did recirc then i would agree with backwards bov and maf not clicked in all the way.

 

where are you at in seattle? i could swing by and look at it if you want.

 

his bov is probably on wrong lol.

 

I put the stock BOV back on... still the same.. I had the GFB all the way recirc...but I didn't check to see if the MAF sensor plug was in all the way.... I can use all the help I can get right now... Thanks!!!

 

I work in Bellevue, live in Mill Creek... Lemme know if there is a place we can meet.... I'll drive out to ya... That would be cool if you could help!!!