***Official WA Chat Thread***
I've been in the garage all day today getting my car ready for a track day in a little over a week. Here's what's gone down so far:
Finished:
- Oil change, Mobil 1
- Transmission oil change, Redline MT90
- Transfer case oil change, Castrol GL5
- Rear Diff oil change, Castrol GL5
- Cooling fluid change, straight distilled water with Redline Water Wetter
- New plugs, BPR7ES. My old plugs were SOOOO nasty, totally coppered out with an eroded gap of like .034". Surprised it still ran so well.

Still Required:
- Bleed brakes with RBF 600
- Reinstall KW V3's
- Uber camber alignment
New Aero parts ready to test:
- Rear Gurney Flap
- Vented rear bumper
Aero still in the works:
- Full length side skirt splitters
- Extended flat undertray of rear edge of APR splitter
More stuff half way built:
- Custom harness bar
- Custom fixed base seat mount for Sparco race seat

Finished:
- Oil change, Mobil 1
- Transmission oil change, Redline MT90
- Transfer case oil change, Castrol GL5
- Rear Diff oil change, Castrol GL5
- Cooling fluid change, straight distilled water with Redline Water Wetter
- New plugs, BPR7ES. My old plugs were SOOOO nasty, totally coppered out with an eroded gap of like .034". Surprised it still ran so well.

Still Required:
- Bleed brakes with RBF 600
- Reinstall KW V3's
- Uber camber alignment
New Aero parts ready to test:
- Rear Gurney Flap
- Vented rear bumper
Aero still in the works:
- Full length side skirt splitters
- Extended flat undertray of rear edge of APR splitter
More stuff half way built:
- Custom harness bar
- Custom fixed base seat mount for Sparco race seat

Thread Starter
Evolved Member
iTrader: (20)
Joined: Feb 2008
Posts: 2,757
Likes: 3
From: Seattle, Wa
Guys, I am buying this wheels from this guy and I need advices on a save transaction.
https://www.evolutionm.net/forums/sh...d.php?t=342712
https://www.evolutionm.net/forums/sh...d.php?t=342712


