2005 Evo MR build
Thread Starter
Newbie
Joined: Nov 2013
Posts: 6
Likes: 0
From: PA
2005 Evo MR build
I purchased this Evo MR, new, in 2005. After more than 9 years 80K plus miles and many thousands of dollars I'm happy with this set up.
Wiseco pistons (.20 overbore)
Manley con-rods
Nitriled Main Shaft
deleted balancing shafts
Valve job
springs/retainers (10,000rpm)
Unorthodox Cam adjusters
Cosworth headgasket
HKS 272 Cams
DC exhaust manifold
GT35R turbo
Turbo XS Boost controller
external 52mm waste gate
Injen Intake
HPF exhaust
custom hard piping
Perring fuel rail
AMS fuel control
AEM Alcohol Injection System
HKS SSC BOV
Perring FMI
AEM Dry air filter
Exedy multi-plate clutch
Shep Transfer helical TC
and many other parts/mods that I can't remember
Dyno-tuning will be done the 11th of November
Looking for 45Whp on a mild tune. (done the aggressive, not fun for normal driving)
Wiseco pistons (.20 overbore)
Manley con-rods
Nitriled Main Shaft
deleted balancing shafts
Valve job
springs/retainers (10,000rpm)
Unorthodox Cam adjusters
Cosworth headgasket
HKS 272 Cams
DC exhaust manifold
GT35R turbo
Turbo XS Boost controller
external 52mm waste gate
Injen Intake
HPF exhaust
custom hard piping
Perring fuel rail
AMS fuel control
AEM Alcohol Injection System
HKS SSC BOV
Perring FMI
AEM Dry air filter
Exedy multi-plate clutch
Shep Transfer helical TC
and many other parts/mods that I can't remember
Dyno-tuning will be done the 11th of November
Looking for 45Whp on a mild tune. (done the aggressive, not fun for normal driving)
Newbie
Joined: May 2011
Posts: 93
Likes: 0
From: Sonoma County
I purchased this Evo MR, new, in 2005. After more than 9 years 80K plus miles and many thousands of dollars I'm happy with this set up.
Wiseco pistons (.20 overbore)
Manley con-rods
Nitriled Main Shaft
deleted balancing shafts
Valve job
springs/retainers (10,000rpm)
Unorthodox Cam adjusters
Cosworth headgasket
HKS 272 Cams
DC exhaust manifold
GT35R turbo
Turbo XS Boost controller
external 52mm waste gate
Injen Intake
HPF exhaust
custom hard piping
Perring fuel rail
AMS fuel control
AEM Alcohol Injection System
HKS SSC BOV
Perring FMI
AEM Dry air filter
Exedy multi-plate clutch
Shep Transfer helical TC
and many other parts/mods that I can't remember
Dyno-tuning will be done the 11th of November
Looking for 45Whp on a mild tune. (done the aggressive, not fun for normal driving)
Wiseco pistons (.20 overbore)
Manley con-rods
Nitriled Main Shaft
deleted balancing shafts
Valve job
springs/retainers (10,000rpm)
Unorthodox Cam adjusters
Cosworth headgasket
HKS 272 Cams
DC exhaust manifold
GT35R turbo
Turbo XS Boost controller
external 52mm waste gate
Injen Intake
HPF exhaust
custom hard piping
Perring fuel rail
AMS fuel control
AEM Alcohol Injection System
HKS SSC BOV
Perring FMI
AEM Dry air filter
Exedy multi-plate clutch
Shep Transfer helical TC
and many other parts/mods that I can't remember
Dyno-tuning will be done the 11th of November
Looking for 45Whp on a mild tune. (done the aggressive, not fun for normal driving)
Thread
Thread Starter
Forum
Replies
Last Post
Kins
Project Cars / Build Threads
155
May 15, 2015 07:41 AM
Demon_ni2
Lancer Aftermarket Forced Induction Tech
698
Aug 11, 2013 06:25 PM
WickedIXMR
Vendor Service / Parts / Tuning Review
67
Mar 13, 2009 01:43 PM