have a fast key for the Evo x, I bought it from someone local who said they never programmed it and I never got around to going to dealership and getting it done. So im not sure if its ever been programmed or not. Asking for $110 Shipped OBO.

 

Would you take 75

 

PM'ed

 

You dont need the dealer to program it.

 

You need 2 other keys I think.

 

You need at least one key thats already programmed to program the new one without the dealer.

 

How do u program it then

 

I do believe you require 2 keys to add a 3rd or 4th(max 4). If you only have one, the dealership is not the only option. A decent lock smith can program key fobs.

 

Bump

 

I found this online started by Rico.
http://******************/forums/top...te-programing/
Im pretty sure this is how i programed my extra remote a few years ago.
GL



FAST Keyless Remote Programing
Started by Rico, 3 Jan 2010
2 posts in this topic
Rico 4
Rico
Members
41 posts
Posted 3 Jan 2010
This How-to is for those who don't have their Mitsubishi Owners Manual or misplaced it and need to program the F.A.S.T. Remote Transmitter.

These instructions are per owners manual word for word:

You can program new F.A.S.T. Keys to the system if you have two valid (already registered) F.A.S.T. Keys, blank (not registered) F.A.S.T. Key and emergency key (specially cut for your vehicle at your Mitsubishi Motors Dealer).

To use the new F.A.S.T. Key it is necessary to register the key with both the electronic immobilizer and keyless entry system.

For F.A.S.T. Key programing, follow the procedures below.

Step 1. Remove the EMERGENCY KEY from the F.A.S.T. Key.

Step 2. While pushing the lock release button, remove the cover of the ignition switch.

Step 3. Insert the EMERGENCY KEY into the ignition switch.

Step 4. Insert the first valid F.A.S.T. Key into the EMERGENCY KEY.

Step 5. Turn the EMERGENCY KEY with the F.A.S.T. Key to the "ON" position for 5 seconds.

Step 6. Turn the EMERGENCY KEY with the F.A.S.T. Key to the "OFF" position. Within 30 seconds after doing so, remove the F.A.S.T. Key from the EMERGENCY KEY, insert the second valid F.A.S.T. Key into the EMERGENCY KEY and turn it to the "ON" position. About 10 seconds later the immobilizer display will start to blink.

Step 7. When the immobilizer starts blinking, turn the second valid F.A.S.T. Key to the "OFF" position and remove it. Within 30 seconds after doing so, insert a BLANK F.A.S.T. Key into the EMERGENCY KEY and turn it to the "ON" position. Perform this operation no more than 30 seconds after the immobilizer display starts blinking. When registration of the ID code is complete, the immobilizer display will come on for 3 seconds then go off. If an error occurs, the immobilizer display will go off during the procedure.

Step 8. If you wish to register another F.A.S.T. Key repeat the process from Step 1.

Good Luck!
0