Mark this thread as Unsold
Enkei RPF1, 18x9.5, 38mm offset, Kumho V710 285/30/18
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Missouri - SCCA MIDIV
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Enkei RPF1, 18x9.5, 38mm offset, Kumho V710 285/30/18
SALE PENDING ON WHEELS AND TIRES SEPERATELY!!! WILL UPDATE WHEN PAYMENT CLEARS
I am selling my set of Autocross wheels and tires. I have one full set of Enkei RPF1 wheels in 18x9.5 with a 38mm offset. These wheels have a set of Kumho V710's in 285/30/18. I would guess the tires have 20% tread left in them and will provide another 20 or so runs if I had to guess. I will take $1250 shipped for the wheels and tires.
These wheels are in good condition and have normal on/off scuffs and one has a 1/2" scrape on the lip from a tire machine at NTB.
These wheels have never been driven on the street and have only been used at autocross events. I did a quick 10 minute clean on these wheels so any marks could likely be taken off with the proper cleaner.
I am selling my set of Autocross wheels and tires. I have one full set of Enkei RPF1 wheels in 18x9.5 with a 38mm offset. These wheels have a set of Kumho V710's in 285/30/18. I would guess the tires have 20% tread left in them and will provide another 20 or so runs if I had to guess. I will take $1250 shipped for the wheels and tires.
These wheels are in good condition and have normal on/off scuffs and one has a 1/2" scrape on the lip from a tire machine at NTB.
These wheels have never been driven on the street and have only been used at autocross events. I did a quick 10 minute clean on these wheels so any marks could likely be taken off with the proper cleaner.
Last edited by CraigWilcox; Oct 5, 2010 at 03:30 PM.
#3
Newbie
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Missouri - SCCA MIDIV
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Bummer, I have been contemplating selling these for a while, but, the dumb *** 50 post rule has held me back from selling anything on here for 1.5 years. Oh well, thanks for the bump!!!
One thing to note, I will be going out of town on Saturday September 25th for 9 days and will be returning October 4th. If I sell these by tomorrow, I will ship them to the new owner. I have a Paypal Business Premier Account so it would be a very easy transaction!!! ;-)
One thing to note, I will be going out of town on Saturday September 25th for 9 days and will be returning October 4th. If I sell these by tomorrow, I will ship them to the new owner. I have a Paypal Business Premier Account so it would be a very easy transaction!!! ;-)
#6
Evolving Member
#7
Newbie
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Missouri - SCCA MIDIV
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
BUMP! My departure is nearing, if someone doesn't act quickly, I can't sell/ship them until I return on October 4th!
Trending Topics
#12
Newbie
iTrader: (3)
Join Date: May 2009
Location: Maryland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
fitment question
I currently have the NT03's in the 18X9.5 with an offset of 27. The 38 offset would be 11 mm closer to the inside of the car. Would the inner part of the tire and rim rub on the suspension?
My 18X9 rims with 38 offset do not touch but was wondering about the extra 1/2 of an inch.
Thanks,
My 18X9 rims with 38 offset do not touch but was wondering about the extra 1/2 of an inch.
Thanks,
#13
Newbie
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Missouri - SCCA MIDIV
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I currently have the NT03's in the 18X9.5 with an offset of 27. The 38 offset would be 11 mm closer to the inside of the car. Would the inner part of the tire and rim rub on the suspension?
My 18X9 rims with 38 offset do not touch but was wondering about the extra 1/2 of an inch.
Thanks,
My 18X9 rims with 38 offset do not touch but was wondering about the extra 1/2 of an inch.
Thanks,
Also, I do have my fenders rolled and my Evo is lowered a good bit as well
Sorry, no pics on the car, I will see if I can dig some up though
#14
Newbie
iTrader: (3)
Join Date: May 2009
Location: Maryland
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
wheel fitment
Thanks Craig!
I am confused a little. I have the Stoptech ST-40 Calipers and the 355 mm rotors up front and the Stoptech ST-22 calipers in the rear. The NT03's I have are a perfect fitment without any spacers. The Enkei wheels I have as my second set are 38 offset and they also do not need any type of spacer.
Does the Stoptech caliper mount differently which allows for more room? I was told and read that I would need spacers but then I bought the rims and they fit great.
Could it be any other reason that I do not need spacers.
Car is lowered, running 265/35/18 on 18X9.5 and 275/35/18 on 18X9 with no issues. Camber is 3.0 in fron and 2.2 in the rear.
Thanks,
I am confused a little. I have the Stoptech ST-40 Calipers and the 355 mm rotors up front and the Stoptech ST-22 calipers in the rear. The NT03's I have are a perfect fitment without any spacers. The Enkei wheels I have as my second set are 38 offset and they also do not need any type of spacer.
Does the Stoptech caliper mount differently which allows for more room? I was told and read that I would need spacers but then I bought the rims and they fit great.
Could it be any other reason that I do not need spacers.
Car is lowered, running 265/35/18 on 18X9.5 and 275/35/18 on 18X9 with no issues. Camber is 3.0 in fron and 2.2 in the rear.
Thanks,
#15
Newbie
Thread Starter
iTrader: (3)
Join Date: Mar 2009
Location: Missouri - SCCA MIDIV
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Craig!
I am confused a little. I have the Stoptech ST-40 Calipers and the 355 mm rotors up front and the Stoptech ST-22 calipers in the rear. The NT03's I have are a perfect fitment without any spacers. The Enkei wheels I have as my second set are 38 offset and they also do not need any type of spacer.
Does the Stoptech caliper mount differently which allows for more room? I was told and read that I would need spacers but then I bought the rims and they fit great.
Could it be any other reason that I do not need spacers.
Car is lowered, running 265/35/18 on 18X9.5 and 275/35/18 on 18X9 with no issues. Camber is 3.0 in fron and 2.2 in the rear.
Thanks,
I am confused a little. I have the Stoptech ST-40 Calipers and the 355 mm rotors up front and the Stoptech ST-22 calipers in the rear. The NT03's I have are a perfect fitment without any spacers. The Enkei wheels I have as my second set are 38 offset and they also do not need any type of spacer.
Does the Stoptech caliper mount differently which allows for more room? I was told and read that I would need spacers but then I bought the rims and they fit great.
Could it be any other reason that I do not need spacers.
Car is lowered, running 265/35/18 on 18X9.5 and 275/35/18 on 18X9 with no issues. Camber is 3.0 in fron and 2.2 in the rear.
Thanks,
Also, did I mention these are 17.5 pounds? They are .5 pound lighter than my Volk CE28Ns!
Craig