Mark this thread as Unsold
Custom Lancer Turbo Kit; Stainless, Ram Manifold, T3/T4 Rebuilt Turbo, SS IC Pipes...
#1
Ram Manifold
The manifold is fitted with a 38mm Tial Wastegate flange and is tapped for an EGT sensor probe.
Please ask if you have any questions.
IC Pipes & Intake Pipes Sold! - Thanks, my-lancer!
Manifold = $500 shipped
Turbo = SOLD
Please ask if you have any questions.
IC Pipes & Intake Pipes Sold! - Thanks, my-lancer!
Manifold = $500 shipped
Turbo = SOLD
Last edited by Z_Lancer_Man; Jul 21, 2007 at 08:48 PM. Reason: Turbo SOLD
Trending Topics
#12
It could work. You actually have two options if you're set on using a T25 or T28 turbo.
1) You could have the flange cutoff and a T28 flange welded on in place
- or -
2) You could get an adapter like this one: T25/28 to T3 Turbo Adapter
Just a side note. If you change the turbo, then the downpipe would need to be altered as well since the downpipe was made using the above manfiold and turbo.
1) You could have the flange cutoff and a T28 flange welded on in place
- or -
2) You could get an adapter like this one: T25/28 to T3 Turbo Adapter
Just a side note. If you change the turbo, then the downpipe would need to be altered as well since the downpipe was made using the above manfiold and turbo.