Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

FS: Gt35r Turbo only

Thread Tools
 
Search this Thread
 
Old May 1, 2007 | 03:58 PM
  #1  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
FS: Gt35r Turbo only

SOLD!!!!!!!!!!!!!!

I have a Gt35r with about 10k miles on it. Highest boost It has seen is 28psi which netted me 540whp.

It does have the true garrett .82 a/r exhaust side which you can tell by the 4 bolt pattern. Its has a 02 housing welded to it and can be used and any stock placement downpipe.

It has the t04s 4in compressor housing cover with anti surge ports.

I want to get a bigger turbo and that is the only reason for me wanting to get rid of it.

I did have the compressor housing polished the the hotside jetcoated. I have about $1500 in the turbo.

I would take $950 shipped for it.








--Josh

Last edited by SwiftEVO; May 24, 2007 at 06:54 AM. Reason: SOLD
Old May 2, 2007 | 09:46 AM
  #2  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
Bump!!!
Old May 3, 2007 | 06:03 AM
  #3  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
ANY Interest?? Pm me with offers!
Old May 3, 2007 | 12:06 PM
  #4  
BOOSTED04's Avatar
Newbie
iTrader: (7)
 
Joined: May 2006
Posts: 87
Likes: 0
From: Plaistow NH
what manifold were you using with this turbo? Some manifolds sit the turbo lower than others, and i want to make sure the downpipe will line up. thanks
Old May 4, 2007 | 08:37 AM
  #5  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
I was using an rnr manifold.

--Josh
Old May 10, 2007 | 08:31 AM
  #6  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
I shined up the compressor housing today!! Check it out.


--Josh

Last edited by SwiftEVO; May 19, 2007 at 07:44 AM.
Old May 11, 2007 | 10:15 AM
  #7  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
bump
Old May 13, 2007 | 08:56 AM
  #8  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
BUMp
Old May 14, 2007 | 10:59 PM
  #9  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
bump $950 shipped
Old May 15, 2007 | 12:50 AM
  #10  
EVO8TOR's Avatar
Evolving Member
iTrader: (5)
 
Joined: Mar 2006
Posts: 152
Likes: 0
From: San Diego
any shaft play, I know how many miles it has but how old is it, when did you buy it and from where? Can the O2 housing welds be removed?

Last edited by EVO8TOR; May 15, 2007 at 12:54 AM.
Old May 15, 2007 | 03:10 AM
  #11  
evoate ya's Avatar
Evolving Member
iTrader: (4)
 
Joined: Sep 2005
Posts: 182
Likes: 0
From: Killadelphia, PA.
Originally Posted by EVO8TOR
any shaft play, I know how many miles it has but how old is it, when did you buy it and from where? Can the O2 housing welds be removed?
All BB Turbos have a minute amount of axial shaftplay.
Old May 15, 2007 | 06:45 AM
  #12  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
Originally Posted by EVO8TOR
any shaft play, I know how many miles it has but how old is it, when did you buy it and from where? Can the O2 housing welds be removed?
Minimum shaft play. Just a normal amount.

I have had it since april of 06. So about 1 year and 1 month is has been running. I bought it from rnr. And yea the welds can be cut off and you could put anything you needed there. Or even get the 4 bolt flange to weld to a downpipe to bolt right up.
Old May 15, 2007 | 11:30 AM
  #13  
EVO8TOR's Avatar
Evolving Member
iTrader: (5)
 
Joined: Mar 2006
Posts: 152
Likes: 0
From: San Diego
Originally Posted by SwiftEVO
Minimum shaft play. Just a normal amount.

I have had it since april of 06. So about 1 year and 1 month is has been running. I bought it from rnr. And yea the welds can be cut off and you could put anything you needed there. Or even get the 4 bolt flange to weld to a downpipe to bolt right up.
Vey interested....how low will you go shipped...will you take $850.00 shipped I can send the money today.
Old May 16, 2007 | 09:15 AM
  #14  
EVOMIZ's Avatar
Evolved Member
iTrader: (11)
 
Joined: Jun 2003
Posts: 1,248
Likes: 1
From: CT
bump for a sweet deal
Old May 16, 2007 | 10:15 AM
  #15  
SwiftEVO's Avatar
Thread Starter
Evolving Member
iTrader: (32)
 
Joined: Sep 2004
Posts: 478
Likes: 0
Originally Posted by EVO8TOR
Vey interested....how low will you go shipped...will you take $850.00 shipped I can send the money today.
i sent you a pm!


Thanks for the bump

--Josh



All times are GMT -7. The time now is 03:48 AM.