Mark this thread as Sold
FS: Revolver Cams & Supertech High Tension Dual Valve Springs
#1
Newbie
Thread Starter
iTrader: (3)
Join Date: Sep 2009
Location: Middle TN
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
FS: Revolver Cams & Supertech High Tension Dual Valve Springs
FOR SALE:
Revolver 262/264 Camshafts for EVO8 (RARE)
Asking $420 SHIPPED, OBO
Condition: Used/Excellent. They were installed, ran for literally a handful of miles, and then removed. They are in EXCELLENT condition.
"Advertised" Duration: 262 deg Intake / 264 deg Exhaust
Duration @ 1mm: 222 deg. Intake / 223 deg. Exhaust
Max Lift: 11.4mm Intake / 11.5mm Exhaust
Lobe Centerlines: 109 deg. Intake / 111 deg. Exhaust
Lobe Separation: 110 deg.
Supertech High Tension Dual Valve Springs & Titanium Retainers
Asking $250 SHIPPED, OBO
Condition: New/Never Ran. These were installed in a head that sat on the shelf for a month and then removed. They have never been installed in a car nor seen any engine cycles whatsoever.
Valve Spring Specifications:
- Part Number: SPR-M1007D3
- Seat Pressure: 110 @ 38.1
- Open (lift) Pressure: 253 @ 11.5
- Max Lift: 13.40mm
- Coil Bind: 24.70mm
- Rate: 12.50 lbs/mm
- Fits any and all 4G63 Engines... DSM / EVO8 / EVO9
- Includes: Dual Springs, Titanium Retainers and Seats
You may contact me via PM or cell 615 713 8987
Revolver 262/264 Camshafts for EVO8 (RARE)
Asking $420 SHIPPED, OBO
Condition: Used/Excellent. They were installed, ran for literally a handful of miles, and then removed. They are in EXCELLENT condition.
"Advertised" Duration: 262 deg Intake / 264 deg Exhaust
Duration @ 1mm: 222 deg. Intake / 223 deg. Exhaust
Max Lift: 11.4mm Intake / 11.5mm Exhaust
Lobe Centerlines: 109 deg. Intake / 111 deg. Exhaust
Lobe Separation: 110 deg.
Supertech High Tension Dual Valve Springs & Titanium Retainers
Asking $250 SHIPPED, OBO
Condition: New/Never Ran. These were installed in a head that sat on the shelf for a month and then removed. They have never been installed in a car nor seen any engine cycles whatsoever.
Valve Spring Specifications:
- Part Number: SPR-M1007D3
- Seat Pressure: 110 @ 38.1
- Open (lift) Pressure: 253 @ 11.5
- Max Lift: 13.40mm
- Coil Bind: 24.70mm
- Rate: 12.50 lbs/mm
- Fits any and all 4G63 Engines... DSM / EVO8 / EVO9
- Includes: Dual Springs, Titanium Retainers and Seats
You may contact me via PM or cell 615 713 8987
Last edited by turbodoug; Oct 24, 2011 at 10:33 AM.
#2
Evolved Member
iTrader: (85)
Whoa. Revolver 264s. Talking about an oldie but still a goodie. If I did not have my Kelford 280s, I would grab these for sure even if only from the old school perspective these add to a build. Speaking of cams, I presently have the 280s still sitting in their original box. I need some springs and retainers for the added peace of mind. The lift recommendation of 13.5mm is more than enough for my build.
Thread
Thread Starter
Forum
Replies
Last Post
ReidFletcher
For Sale/WTB - Engine / Drivetrain / Power
8
Aug 26, 2014 09:15 AM
EvoGeneration
Evo 'For Sale' Engine Internals and Drivetrain
282
Feb 14, 2012 10:36 PM
Vivid Racing
EvoX 'For Sale' Engine Internals and Drivetrain
4
Nov 21, 2008 08:28 AM