I looked around a bit more and looks like it is MR623810

But damn, $430

 

Thanks for double checking. I have no doubt the EVO likely had a few diff options avail. Imagine the shipping cost as well for a large piece like that & the potential for shipping damage

 

Can someone please tell me the part number for the two little plug screws that go in the oil filter housing. They are 3/8 bsp size and are what you remove to put in oil pressure/temp sensors. I'm removing my sensors and gauges and need to plug the holes back up. Thanks, Chris.

 

MD145018 for the 3/8 bsp

 

Anyone know the size of these bolts that hold the trunk lid to the hinge?

 

Part no. MS240202 (6X40 bolt)

 

The clip near the hinge of my gas cap cover broke off. I think it functions to provide spring to open the gas tank door. Anyone know the part#?

 

CLIP,FUEL FILLER LID / Mitsubishi part no. MB642442

 

Hi everyone,

does anyone know the partnumber of Ignition Switch for CN9A/CP9A ?
or is it the same ignition switch for CT9A ? TIA

 

Are you referring to the key switch. See image below item 82612

 

Hi MinusPrevious,

Im referring to 82612 and 82005

 

Hi

Item no. 82612 shows to be: MR289335
Item no. 82005 shows to be: MB903644

The body I was looking at showed the following: 1995/EVO4 / CN9A

Please double check before ordering

 

I didnt realise it first, but the evo 1-3 wherent sold as a us model. Only japane. That diagram isnt correct. Doesn't anyone have the part number for the ac drier / reciver or what's it called?

 

Sorry, the info I provided wasnt spot-on but those older models are tough to search

You should be working w/the guys on the MLR forum. Many more older model EvO owners there. See link in my sig "Best EVO Build".

Or, Why not call the local Dealer

 

Looking for the 3 studs that are threaded into the block bracket for an evo9.

#02888