Need good shop in South Florida
#1
Evolving Member
Thread Starter
Need good shop in South Florida
Im about to buy a ton of stuff for the car and need a good shop that will install and tune the car. I know Gary's shop in Hallandale but dont know the tuning capability there.. especially without a awd dyno. Looking for tuning, getting rid of the rpm and launch limiters and installing everything.
Anybody know of a good shop around that is DSM/EVO known to take care of me?
Getting:
Full 3" turbo back
Intake w/maf
New FMIC with piping
SAFC II
Plugs and wires
and MAYBE
660 cc's or bigger
AFPR
Walbro 255 lph
Turbo timer
Anybody know of a good shop around that is DSM/EVO known to take care of me?
Getting:
Full 3" turbo back
Intake w/maf
New FMIC with piping
SAFC II
Plugs and wires
and MAYBE
660 cc's or bigger
AFPR
Walbro 255 lph
Turbo timer
Last edited by Kevine326; Feb 15, 2006 at 08:34 PM.
#4
Instead of making a new post, Ill bump this one because I also was looking for a reputable shop in the Dade/Broward area... Orlandos not far but its best to work with someone local in case issues arise. Thx
#5
Evolving Member
iTrader: (5)
Join Date: Aug 2005
Location: Miami, FL
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Twilight Performance is in the area (Hialeah), I'd give them a try (at least for a Dyno run).
http://twilightperformance.com/contact.htm
http://twilightperformance.com/contact.htm
#7
Account Disabled
iTrader: (465)
We could handle everything you have listed. We are in Orlando however.
Did this on stock turbo + SAFCII, could do it with yours too relative to your mods.
Launch limiter and rev limit updates are easy with one of our reflashes.
Did this on stock turbo + SAFCII, could do it with yours too relative to your mods.
Launch limiter and rev limit updates are easy with one of our reflashes.
Last edited by TTP Engineering; Mar 8, 2006 at 09:55 PM.
Trending Topics
#8
Evolving Member
iTrader: (5)
Join Date: Nov 2005
Location: Ft.Lauderdale
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Greg at Car Tech is Excellent at Tuning..i know of a new shop that opened up called feyentune performance or something along those lines that has and all wheel drive dyno...but besides that i would go to teh CFT or TITAN in orlando!!
#10
Evolving Member
iTrader: (6)
Join Date: Dec 2004
Location: Deltona
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TTP Engineering
We could handle everything you have listed. We are in Orlando however.
Did this on stock turbo + SAFCII, could do it with yours too relative to your mods.
Launch limiter and rev limit updates are easy with one of our reflashes.
Did this on stock turbo + SAFCII, could do it with yours too relative to your mods.
Launch limiter and rev limit updates are easy with one of our reflashes.
Definitely go to TTP, excellent customer service, timely, proffessional installs, and a great guy to boot! I won't let anyone else touch my car.