Just got home and let me just say that sleeping on the beach in the winter never gets any better. Operation in the ocean in the middle of January sux also. Well I see not much has gone on since then. I definitly have to mess with my fuel maps alittle. My car is crazy!!! Ben, what do you have going on this hoilday? If you got time we should link up and do some messing with my fuel map. Did you get your tactrix cable? Also you still getting that bung welded on? Let me know I 'll roll up there with you. Anyways HOLLA!!!

 

Tactrix, clutch, Hyperforce and dual gauge pillar are all enroute to the house as I write this. Hoping to have all of it by Saturday. Guy can do our bungs on Tuesday evening. Let me know if you are able to do it that day.

 

DANG!! Share the wealth!!

 

Let me know, You're welcome to use the tactrix again...I gave up on getting the mac to work.

 

Tactrix and clutch arrived today. That was some fast *** **** there.

 

My ETS intake arrived today...yay...question is do I install the walbro and intake?...I know it's gonna throw off the afr's and the MAF is probably gonna go bananas from the intake. I wasn't going to get it re-tuned until the cams go in...thoughts?.....3 day weekend. It's hard to just look at sitting on the work bench...

 

install it... just be easy on her... it will affect the tune, but not enough to not drive her.

 

Looks like I got burnt on my tactrix cable. Only thing it does is cause a light show in my dash. All three ACD and the ABS light blinking at the rapid rate.

 

??? that is strange... you sure its the cable ? do you have another one to try ? you may need different drivers

 

psquared's cable worked. New cable came in yesterday, drivers loaded when I plugged it in. ???

 

hmmm... check the pins out.... it is really almost impossible for a cable to go bad if it doesnt have any physical defects. Id try reloading drivers with the cable connected.

maybe its for a Suby ?

 

by the way bigric, you ever going to leave me some feedback for the grounding kit.

 

did you leave me feedback for it ?

usually i reply to those

 

Dec 16th, I left it.

 

Hopefully you get that cable working...hopefully its as simple as driver/s. Yeah, I want to put the stuff in, but limping around kinda sux...we'll see.

alicea8541, if you need my cable just let me know, I can meet up with you somewhere...