First up we have our newest intake for the Evo 8and 9. This kit is for those who still are using a stock MAF.



The STM Intake Pipe is designed for your VIII-IX running the stock MAF sensor and will adapt to any stock-style blow off valve. The pipe will free up power and let your 4g63 breathe while giving your intake a bit more aggressive sound.

Included in the full kit is a K&N Breather Filter for your valve cover.

We offer this as a whole kit pictured above, or you can purchase just the pipe alone pictured below.

STM Intake Kit Includes:
- Tig welded, lightweight aluminum Intake Pipe
- Vibrant Air Filter with MAF Adapter
- 2.5-3" Vibrant Coupler (black)
- 3-3.25" Vibrant Coupler (black)
- Worm Clamps (x4)
- K&N Valve Cover Breather Filter
- Mustang Dyno Graph: +13 HP on *Stock Evo


We also offer this as a Pipe only option.



This comparision was done on our Mustang Dyno to a mainly stock 04 Evo with 120,000 miles (Walbro 255, Hallman, test pipe & ECU flash). Nothing was altered between runs.

STM Intake: Solid
Stock air box with K&N Drop-In: Dotted

Max increase in HP was +13 and the graph shows increases from 4,000 rpm all the way through... right where you want it!

Gains can be expected to be higher with more air flow and boost, of course.






Next we have our Speed density kit. This kit we have not tested nor do we intend to because it is so much different than the stock pipe kit and there is no MAF in the way. Its a pretty simple kit though.



Installed in a Evo 9



And last but not least we have a 4 inch kit for the DIY people out there. This kit comes with everything you need to make your own intake and seems to work really well!



All of these kits can be found on our website here.

http://www.streettunedmotorsports.co...evo_intake.htm

Thanks for taking the time to look!

-STM

 

up


-Em

 

best bang for your buck on the 4' intake if i did not make my own i would of purchased this. i def need the air filter though

 

We keep them in stock. Feel free to give us a ring.


-Em

 

or how about since i have the aem coming to my house i just bring the car up for the STM treatment we talked about.. this is brian from scranton we talked 2 weeks ago you talked me into the aem ems and having you guys tune it..

 

very nice 4in intake do you have a solution for a 4in with the stock maf

 

Sure, We can add a 4inch to 3.25 reducer. Just give us a ring!


-Em

 

Sounds good!

See you soon

-Em

 

We have a couple more of these in stock now.


Thanks for the orders guys!

-Em

 

Back to the top. We got a few more done today and ready to go.


-Em

 

I just sent you guys an email regarding my intake situation...

Vic

 

do u have something for the fp red or black ?? 80mm

 

yes. All of these will work with them as long as you use a 3 inch coupler on the turbo instead of the reducer. Give us a call to order it for that setup.


-Em