Ams f1-i sale!!!! Biggest sale ever!!!
Oct 6, 2011, 12:38 PM
#1
Ams f1-i sale!!!! Biggest sale ever!!!
It's time to help save our loyal EVO VIII and IX customers some money!!!
Retail Pricing: 1029.95
Limited time sale price: $849.95!!!!!
The AMS EVO VIII/IX F1-I Intake Manifold was designed to outperform every 4G63 manifold available including our own VSR. We referenced many modern design examples and engineering studies to bring you the best intake manifold ever made for the EVO VIII/IX.
For the past 3 years the AMS VSR has been the standard to which all other manifolds were compared. For the F1-I the plan was simple, to take our already power potent VSR and make it even better! Designed and prototyped in house by our team of engineers the new AMS F1-I Intake Manifold now features cast aluminum construction for added strength. Casting this manifold also allowed us to optimize the output of the manifold with larger bell horns, larger plenum, and matched cylinder port angles.
In preliminary testing the plastic/fiberglass F1-I prototype was tested back to back against the AMS VSR. At only 15 pounds of boost the new design made an additional 15-17whp horsepower across the board! 5% gains were seen throughout the ENTIRE POWER BAND!
Features
* Powder Coated Black
* Cast aluminum construction for added strength
* CAD optimized tapered runners, dyno tested for maximum results
* Matched cylinder port angle
* Large bell horns and plenum
* Choice of throttle body bolt pattern
Includes
* AMS F1-I Intake Manifold*
* Factory Mitsubishi throttle body and intake manifold gasket
* Stainless steel intake manifold support bracket
* Vacuum fittings
* Custom made dip stick tube
* All necessary hardware and detailed installation guide
Options
* Throttle body flange types: Stock Mitsubishi and Ford 5.0
Applications
* Mitsubishi Evolution 8, 9
* GSR, MR, RS and SE
* Fits all USDM, JDM and European Models
Product Notes
* Please indicate when ordering what throttle body you will run. If you want to run the 5.0 flange AMS recommends running the Boomba throttle body to keep stock like idle and drivability. It will bolt directly to the 5.0 flanged manifold.
* Due to throttle body placement on the F1-I, the upper IC pipe may need to be modified. Proper throttle cable adjustment is needed to ensure 100% throttle opening. A throttle stop (available through AMS) may be needed for aftermarket throttle bodies.
* A catch can or alternative routing of the PCV is required during installation of this product.
http://www.youtube.com/watch?v=MU1od...layer_embedded
CLICK HERE TO ORDER!!!!
Retail Pricing: 1029.95
Limited time sale price: $849.95!!!!!
The AMS EVO VIII/IX F1-I Intake Manifold was designed to outperform every 4G63 manifold available including our own VSR. We referenced many modern design examples and engineering studies to bring you the best intake manifold ever made for the EVO VIII/IX.
For the past 3 years the AMS VSR has been the standard to which all other manifolds were compared. For the F1-I the plan was simple, to take our already power potent VSR and make it even better! Designed and prototyped in house by our team of engineers the new AMS F1-I Intake Manifold now features cast aluminum construction for added strength. Casting this manifold also allowed us to optimize the output of the manifold with larger bell horns, larger plenum, and matched cylinder port angles.
In preliminary testing the plastic/fiberglass F1-I prototype was tested back to back against the AMS VSR. At only 15 pounds of boost the new design made an additional 15-17whp horsepower across the board! 5% gains were seen throughout the ENTIRE POWER BAND!
Features
* Powder Coated Black
* Cast aluminum construction for added strength
* CAD optimized tapered runners, dyno tested for maximum results
* Matched cylinder port angle
* Large bell horns and plenum
* Choice of throttle body bolt pattern
Includes
* AMS F1-I Intake Manifold*
* Factory Mitsubishi throttle body and intake manifold gasket
* Stainless steel intake manifold support bracket
* Vacuum fittings
* Custom made dip stick tube
* All necessary hardware and detailed installation guide
Options
* Throttle body flange types: Stock Mitsubishi and Ford 5.0
Applications
* Mitsubishi Evolution 8, 9
* GSR, MR, RS and SE
* Fits all USDM, JDM and European Models
Product Notes
* Please indicate when ordering what throttle body you will run. If you want to run the 5.0 flange AMS recommends running the Boomba throttle body to keep stock like idle and drivability. It will bolt directly to the 5.0 flanged manifold.
* Due to throttle body placement on the F1-I, the upper IC pipe may need to be modified. Proper throttle cable adjustment is needed to ensure 100% throttle opening. A throttle stop (available through AMS) may be needed for aftermarket throttle bodies.
* A catch can or alternative routing of the PCV is required during installation of this product.
http://www.youtube.com/watch?v=MU1od...layer_embedded
CLICK HERE TO ORDER!!!!
Oct 10, 2011, 02:12 PM
#7
Evolving Member
iTrader: (16)
Join Date: Sep 2006
Location: Salisbury, MD
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm this is really tempting.. I'm trying to do an engine build this winter and the cost keeps goin up,hahahaha....
I'm not gunna have enough money for a turbo :\
I'm not gunna have enough money for a turbo :\
Trending Topics
Jan 5, 2012, 09:20 AM
#11
You will need a custom/modified upper ic piping to work with this manifold. I would recommend bolting the manifold to the car and then see what needs to be modified with your current upper ic piping.
Aug 7, 2017, 02:27 AM
#12
Newbie
Join Date: Oct 2007
Location: Asia
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Is the AMS F1 for evo 89 still available ??
Is the AMS F1 evo89 manifold still available ?
It's time to help save our loyal EVO VIII and IX customers some money!!!
Retail Pricing: 1029.95
Limited time sale price: $849.95!!!!!
The AMS EVO VIII/IX F1-I Intake Manifold was designed to outperform every 4G63 manifold available including our own VSR. We referenced many modern design examples and engineering studies to bring you the best intake manifold ever made for the EVO VIII/IX.
For the past 3 years the AMS VSR has been the standard to which all other manifolds were compared. For the F1-I the plan was simple, to take our already power potent VSR and make it even better! Designed and prototyped in house by our team of engineers the new AMS F1-I Intake Manifold now features cast aluminum construction for added strength. Casting this manifold also allowed us to optimize the output of the manifold with larger bell horns, larger plenum, and matched cylinder port angles.
In preliminary testing the plastic/fiberglass F1-I prototype was tested back to back against the AMS VSR. At only 15 pounds of boost the new design made an additional 15-17whp horsepower across the board! 5% gains were seen throughout the ENTIRE POWER BAND!
Features
* Powder Coated Black
* Cast aluminum construction for added strength
* CAD optimized tapered runners, dyno tested for maximum results
* Matched cylinder port angle
* Large bell horns and plenum
* Choice of throttle body bolt pattern
Includes
* AMS F1-I Intake Manifold*
* Factory Mitsubishi throttle body and intake manifold gasket
* Stainless steel intake manifold support bracket
* Vacuum fittings
* Custom made dip stick tube
* All necessary hardware and detailed installation guide
Options
* Throttle body flange types: Stock Mitsubishi and Ford 5.0
Applications
* Mitsubishi Evolution 8, 9
* GSR, MR, RS and SE
* Fits all USDM, JDM and European Models
Product Notes
* Please indicate when ordering what throttle body you will run. If you want to run the 5.0 flange AMS recommends running the Boomba throttle body to keep stock like idle and drivability. It will bolt directly to the 5.0 flanged manifold.
* Due to throttle body placement on the F1-I, the upper IC pipe may need to be modified. Proper throttle cable adjustment is needed to ensure 100% throttle opening. A throttle stop (available through AMS) may be needed for aftermarket throttle bodies.
* A catch can or alternative routing of the PCV is required during installation of this product.
http://www.youtube.com/watch?v=MU1od...layer_embedded
CLICK HERE TO ORDER!!!!
Retail Pricing: 1029.95
Limited time sale price: $849.95!!!!!
The AMS EVO VIII/IX F1-I Intake Manifold was designed to outperform every 4G63 manifold available including our own VSR. We referenced many modern design examples and engineering studies to bring you the best intake manifold ever made for the EVO VIII/IX.
For the past 3 years the AMS VSR has been the standard to which all other manifolds were compared. For the F1-I the plan was simple, to take our already power potent VSR and make it even better! Designed and prototyped in house by our team of engineers the new AMS F1-I Intake Manifold now features cast aluminum construction for added strength. Casting this manifold also allowed us to optimize the output of the manifold with larger bell horns, larger plenum, and matched cylinder port angles.
In preliminary testing the plastic/fiberglass F1-I prototype was tested back to back against the AMS VSR. At only 15 pounds of boost the new design made an additional 15-17whp horsepower across the board! 5% gains were seen throughout the ENTIRE POWER BAND!
Features
* Powder Coated Black
* Cast aluminum construction for added strength
* CAD optimized tapered runners, dyno tested for maximum results
* Matched cylinder port angle
* Large bell horns and plenum
* Choice of throttle body bolt pattern
Includes
* AMS F1-I Intake Manifold*
* Factory Mitsubishi throttle body and intake manifold gasket
* Stainless steel intake manifold support bracket
* Vacuum fittings
* Custom made dip stick tube
* All necessary hardware and detailed installation guide
Options
* Throttle body flange types: Stock Mitsubishi and Ford 5.0
Applications
* Mitsubishi Evolution 8, 9
* GSR, MR, RS and SE
* Fits all USDM, JDM and European Models
Product Notes
* Please indicate when ordering what throttle body you will run. If you want to run the 5.0 flange AMS recommends running the Boomba throttle body to keep stock like idle and drivability. It will bolt directly to the 5.0 flanged manifold.
* Due to throttle body placement on the F1-I, the upper IC pipe may need to be modified. Proper throttle cable adjustment is needed to ensure 100% throttle opening. A throttle stop (available through AMS) may be needed for aftermarket throttle bodies.
* A catch can or alternative routing of the PCV is required during installation of this product.
http://www.youtube.com/watch?v=MU1od...layer_embedded
CLICK HERE TO ORDER!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Boost411
Evo Engine / Turbo / Drivetrain
0
Dec 17, 2017 08:22 PM
extremepsi
Vendor Announcements
0
Jul 17, 2017 02:57 PM
mishimoto
Vendor Announcements
21
Oct 16, 2016 12:05 AM
STM Tuned
Evo 'For Sale' External Engine / Power
5
Sep 19, 2016 08:22 PM
Andrew@AMS
Vendor Announcements
10
Mar 4, 2016 09:27 PM
