Lets talk tooning!
Lets talk tooning!
Thanks KK! So how many Xede CarTooners do we have? 
First order of business is Check Your 3D graphs before burning the eeprom!! It is very easy to see mistakes you have made and correct it. It has saved an errant burns 2 times now!
Second For the guys that have used Maf scaling (or unscaling really ) on problem idels have you found values that eliminates the rough idel? Also I dont expect really for the computer to "learn" around this as its just a scale to input into the xede kinda just an amplitude adjustment - Any other observations on this?
Third have WBO2 tuners noticed any long term "learning" around CL fuel or timing changes?
First order of business is Check Your 3D graphs before burning the eeprom!! It is very easy to see mistakes you have made and correct it. It has saved an errant burns 2 times now!
Second For the guys that have used Maf scaling (or unscaling really ) on problem idels have you found values that eliminates the rough idel? Also I dont expect really for the computer to "learn" around this as its just a scale to input into the xede kinda just an amplitude adjustment - Any other observations on this?
Third have WBO2 tuners noticed any long term "learning" around CL fuel or timing changes?
Last edited by MP5; Nov 25, 2003 at 12:19 PM.
May be we can have some basic stickys.
For example.
How to use software from Xede?
Hardware install with a clear daigram for each wire and function.
Short cuts for adjusting like (<) (>)
Using Data Display
Runing features like ext. things like WI, or NOS.
For example.
How to use software from Xede?
Hardware install with a clear daigram for each wire and function.
Short cuts for adjusting like (<) (>)
Using Data Display
Runing features like ext. things like WI, or NOS.
In Timeout
Joined: Oct 2003
Posts: 427
Likes: 0
From: Kennesaw Ga
I will do the xede install, I do not know the software yet but will. I am also going to take pics because to be honest I did not know what to do with the wires and I used to write computer manuals so I think I can do this lol 
In Timeout
Joined: Oct 2003
Posts: 427
Likes: 0
From: Kennesaw Ga
Someone needs to write up directions on how to load / change a map. Vishnu's stuff is out of date with that XUpdate or whatever the link does not even work. Someone who knows how to change maps please put something up.
Thanks!
Thanks!
xede running awesome
We jsut finished my xede, it runs unreal! car peaks at 22 and drops to 21 at redline, it pulls like a mother!!!! i take back some of the negative things i said about shiv we were going through some tough times and i wasnt sure if he was gonna help but he did......track fri night to see hwat she can do , looking for mid 12's!!!!!! 
Trending Topics
In Timeout
Joined: Oct 2003
Posts: 427
Likes: 0
From: Kennesaw Ga
Re: xede running awesome
Glad it's working for you. I am going to install my tonight I spent $100 on tools at lunch today to make sure I do it right lolrof. I will post pics so anyone can see it. I will take pics of the harness by it's self so everyone can see what goes where. What map are you running on your car?
Originally posted by evo8power
We jsut finished my xede, it runs unreal! car peaks at 22 and drops to 21 at redline, it pulls like a mother!!!! i take back some of the negative things i said about shiv we were going through some tough times and i wasnt sure if he was gonna help but he did......track fri night to see hwat she can do , looking for mid 12's!!!!!!
We jsut finished my xede, it runs unreal! car peaks at 22 and drops to 21 at redline, it pulls like a mother!!!! i take back some of the negative things i said about shiv we were going through some tough times and i wasnt sure if he was gonna help but he did......track fri night to see hwat she can do , looking for mid 12's!!!!!!
In Timeout
Joined: Oct 2003
Posts: 427
Likes: 0
From: Kennesaw Ga
Yep, Ken called me to make sure I got everything and if I needed any help, he also helped me figure out what wires went where. Super support!
Originally posted by evo8power
shiv maped one for me , 93 octane with no cats........pulls like a *****!
shiv maped one for me , 93 octane with no cats........pulls like a *****!
Re: xede running awesome
Originally posted by evo8power
We jsut finished my xede, it runs unreal! car peaks at 22 and drops to 21 at redline, it pulls like a mother!!!! i take back some of the negative things i said about shiv we were going through some tough times and i wasnt sure if he was gonna help but he did......track fri night to see hwat she can do , looking for mid 12's!!!!!!
We jsut finished my xede, it runs unreal! car peaks at 22 and drops to 21 at redline, it pulls like a mother!!!! i take back some of the negative things i said about shiv we were going through some tough times and i wasnt sure if he was gonna help but he did......track fri night to see hwat she can do , looking for mid 12's!!!!!!
What was the problem? Software or hardware?
blow off valve!!!!! i wrote shiv an apology and he hasnt responded...oh well...if doesnt want to acept no loss....it was actually turboxs's .....they said to keep all 6 washers in the valve if im plumbing it back into the intake, its only if you vent back to the atmosphere that you need the washers, it was messing up all my boost readings and throwing my car around, it runs awesome know....i raced my buddys evo which ran 12.6 and i beat him....twice...on the highway!!! lol
Originally posted by evo8power
blow off valve!!!!! i wrote shiv an apology and he hasnt responded...oh well...if doesnt want to acept no loss....it was actually turboxs's .....they said to keep all 6 washers in the valve if im plumbing it back into the intake, its only if you vent back to the atmosphere that you need the washers, it was messing up all my boost readings and throwing my car around, it runs awesome know....i raced my buddys evo which ran 12.6 and i beat him....twice...on the highway!!! lol
blow off valve!!!!! i wrote shiv an apology and he hasnt responded...oh well...if doesnt want to acept no loss....it was actually turboxs's .....they said to keep all 6 washers in the valve if im plumbing it back into the intake, its only if you vent back to the atmosphere that you need the washers, it was messing up all my boost readings and throwing my car around, it runs awesome know....i raced my buddys evo which ran 12.6 and i beat him....twice...on the highway!!! lol
Shiv is out shopping for a House today so he might not have seen it yet.
Eric
In Timeout
Joined: Oct 2003
Posts: 427
Likes: 0
From: Kennesaw Ga
I have seen this before where a BOV screws things up. Keep it stock man and when someone show's you a BOV on a evo you can just laugh and know they have no idea what they are doing. The stock one is fine, sell it and keep the 100$ for race gas
Originally posted by evo8power
blow off valve!!!!! i wrote shiv an apology and he hasnt responded...oh well...if doesnt want to acept no loss....it was actually turboxs's .....they said to keep all 6 washers in the valve if im plumbing it back into the intake, its only if you vent back to the atmosphere that you need the washers, it was messing up all my boost readings and throwing my car around, it runs awesome know....i raced my buddys evo which ran 12.6 and i beat him....twice...on the highway!!! lol
blow off valve!!!!! i wrote shiv an apology and he hasnt responded...oh well...if doesnt want to acept no loss....it was actually turboxs's .....they said to keep all 6 washers in the valve if im plumbing it back into the intake, its only if you vent back to the atmosphere that you need the washers, it was messing up all my boost readings and throwing my car around, it runs awesome know....i raced my buddys evo which ran 12.6 and i beat him....twice...on the highway!!! lol