Hey all. Ok I got meth injecton. Coolingmist meth kit.. I'm going for 500hp.. ( yes bigger turbo) What I'm wondering is what is the best jet to spray meth and what size is recommended.. I know all different jets spray a different patern and what not. What one is the best and why?? Plus again what size will I need.... thanks for the help

 

How big are your injectors?
What duty cycle do you typically see throughout your rev range?
Are you going to run 100% meth, water, etc...?

 

Coolingmist will tell you what is best for your application. Just give em a call.

 

Oops my bad..

100% meth
1000cc RC injectors
Stock ecu

Duty sycle I don't know because I'm building the car up now. It will have a 3076 or like tubro on it... going for 500hp around that ballpark..

 

Ok that's cooling mists recommendation... many companys make many kinda of jets. Big small and with different spray paterns. My question is what spray patern is best and what company makes it.. And what size do I need.

 

I think every company provide jets that have a cone shaped spray pattern. Some might have a wider angle cone but I think most companies provide fairly similar jets. Your best bet is to use Coolingmist jets as they will probably hook up to your system easily.

 

use 2 smaller jets spaced apart than 1 big one. distribution and better atomization can be achieved

 

where do you recommend putting each jet?? i was thinking insted of putting it on the uicp can we tap it into the top of the intake manifold???

what size jets do we use for a dual spray 500hp car??

 

space the meth injectors ~intake manifold width apart.

as to jet size for high powered/boost evo, scott@ttp or 94awdcoupe are the gurus at that

 

Ok so put on at the bend on the uicp like spraying into the t/b and the other about 1 foot down from the top jet into the mid piont of the uicp??? Thanks man

 

Also I recerc my bov. Not sure if it matters but should I put the second jet befor or after where the bov tube meets the uicp

 

bump for more info?

 

Bump

 

Bump