Turbo timer HKS type 1???
Jul 9, 2003, 09:39 PM
#1
Newbie
Thread Starter
Join Date: Mar 2003
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Turbo timer HKS type 1???
Ok...I installed the hks turbo timer and everything is working properly except for the main function..THE IDLE TIME FOR THE CAR TO SHUT DOWN....I pull the hand brakes up and turn the ignition off. But the Turbo Timer just shuts down with the car...I thought its suppose to count down and shut down according to the setting (30 secs). But when i turn the ignition just 1 click back with the keys still ATTACH to the ignition its counts down and shuts the car off. I want to just turn the ignition off with the keys out of the ignition and walk away while the car idles to a shut down. How do i do that??????
Plz help Im confuse...i hope thats now how turbo timer's work.
Plz help Im confuse...i hope thats now how turbo timer's work.
Jul 9, 2003, 09:59 PM
#7
Evolved Member
iTrader: (3)
Join Date: Apr 2003
Location: dublin, oxford, chillicothe OH
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
if you used a harness i dont know what is wrong
but if you didnt
it could be that your power source is connected to an accessory
so when you turn the key to the off position you cut the power
but if you didnt
it could be that your power source is connected to an accessory
so when you turn the key to the off position you cut the power
Trending Topics
Jul 9, 2003, 10:57 PM
#9
Newbie
Thread Starter
Join Date: Mar 2003
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Does it matter where i ground the wire too??
E-brake is tapped right... becuz i push the e-brake down and
the car shut's off right away.
And where is the power source located at?? what wire is it?
Yes i have a harness and it fits pretty good.
E-brake is tapped right... becuz i push the e-brake down and
the car shut's off right away.
And where is the power source located at?? what wire is it?
Yes i have a harness and it fits pretty good.
Jul 9, 2003, 11:03 PM
#12
Evolved Member
iTrader: (3)
Join Date: Apr 2003
Location: No VA
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Same thing - technically it's a parking brake... That has to be up before you turn the car off or else the sensor will reset when you pull it up and turn the turbo timer (and the motor) off. 
Jul 10, 2003, 12:30 AM
#13
Newbie
Thread Starter
Join Date: Mar 2003
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
yea i did that already and same thing happens. Parking brake was up....i turn the key to the point where i can take the key out and poofff the cars turns off....this sux....
i already tried to turn the key back 1 click with the parking up.....and while the timer was counting down...i pulled the handbrake down and poof the car shut down...so that should show me that the e-brake is correctly wired up....
i need more suggestions
i already tried to turn the key back 1 click with the parking up.....and while the timer was counting down...i pulled the handbrake down and poof the car shut down...so that should show me that the e-brake is correctly wired up....
i need more suggestions
Jul 10, 2003, 04:14 AM
#14
Evolved Member
iTrader: (6)
Join Date: Jan 2003
Location: NYC
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Also you will want to check your count down settings. If you are in the automode, and the counter is at 0, the car will just shut off. Automode calculates the estimated idle time needed. If you run the car hard, the auto mode will show a value. If you run under boost, the timer will be at 0. Choose either manual mode, mode 1 or 2. I believe mode 1 is 1 min and mode 2 is 3 mins.
Jul 10, 2003, 04:21 PM
#15
Evolved Member
iTrader: (10)
Join Date: Jan 2003
Location: Orange County, CA
Posts: 1,630
Likes: 0
Received 0 Likes
on
0 Posts
What harness are you using? it should be the HKS MT-6 or the Greddy one. They both work with the Type 1/0 and the evo. If you are 100% sure you have everything wired right, you need to call the place you bought it from to get a replacement.
Post the colors of the wires you tapped for us. I've installed several TTs already so I can tell you what you need to do. There's also a tutorial by one of my customers .
Rob
Post the colors of the wires you tapped for us. I've installed several TTs already so I can tell you what you need to do. There's also a tutorial by one of my customers .
Rob
Thread
Thread Starter
Forum
Replies
Last Post
740 Turbo Brick
Evo Electrical / Audio / Security
2
May 7, 2014 05:37 PM
gudmundur
General Engine Management / Tuning Forum
11
Jul 19, 2008 01:21 PM
vr4_211
Evo How To Requests / Questions / Tips
1
Dec 4, 2005 09:22 PM
o00o
Evo How To Requests / Questions / Tips
18
Feb 5, 2004 10:32 AM
