Adjustable Cam Gears for 272 Upgrade?
Jul 19, 2017, 01:23 PM
#3
EvoM Guru
iTrader: (1)
Not necessary if you buy quality cams from GSC, Kelford, HKS, Cosworth, etc. They won't need degreed unless you want to play with settings to alter the power curve.
Jul 21, 2017, 04:57 PM
#6
Account Disabled
They all need degreeing because they all have errors when reground.
Even the aftermarket cam gears have errors and the zero marks are never zero.
But if you don't spend the time measuring........you won't know.
Even the aftermarket cam gears have errors and the zero marks are never zero.
But if you don't spend the time measuring........you won't know.
Trending Topics
Jul 22, 2017, 05:07 PM
#8
Account Disabled
If you do the maths on the resurfacing of the head/ block it's about half a crank degree at max
In fact it's so small it's insignificant.
Most or the errors are in the aftermarket gears and in the cams.
As far as the video goes.......you don't need a degree wheel.......use the ring gear.
You don't need a solid lash adjuster , use a washer under the stock one.
Remove all the rocker arms apart from the one you're measuring.
In fact it's so small it's insignificant.
Most or the errors are in the aftermarket gears and in the cams.
As far as the video goes.......you don't need a degree wheel.......use the ring gear.
You don't need a solid lash adjuster , use a washer under the stock one.
Remove all the rocker arms apart from the one you're measuring.
Thread
Thread Starter
Forum
Replies
Last Post
donzilla2004
For Sale/WTB - Engine / Drivetrain / Power
3
Jul 12, 2013 05:12 AM
01sporty
For Sale/WTB - Engine / Drivetrain / Power
11
Apr 1, 2013 10:24 AM
4G63 DSM
For Sale/WTB - Engine / Drivetrain / Power
20
Feb 10, 2013 04:59 PM
EVO Nathan
Evo Engine / Turbo / Drivetrain
38
Dec 12, 2005 09:09 AM