ROAD/RACE- Cam and Ported Head
Thread Starter
Former Sponsor
iTrader: (67)
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
Evolving Member
Joined: Sep 2005
Posts: 248
Likes: 5
From: Bridgeport (c.t.)
im here i got back from having my car tune this is what went on i went in with 143 hp qnd 138 of TQ and got out with 153.7HP and 153.8 TQ 
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
10.7hp, not bad. How about posting up the dyno chart? Numbers aren't low, thats the expected power RRM estimates from their cams - 10-15hp.
I guess with a tune you would've expected a little more, but at least your torque increased significantly.
Everyone nowadays seems to have numbers without charts
Ah well, i'll drink to your results
I guess with a tune you would've expected a little more, but at least your torque increased significantly.
Everyone nowadays seems to have numbers without charts
Ah well, i'll drink to your results
Last edited by MITVRX; Jun 18, 2007 at 05:49 PM.
Thread Starter
Former Sponsor
iTrader: (67)
Joined: Dec 2001
Posts: 7,826
Likes: 3
From: Santa Fe Springs, CA.
Everyone's results are going to be different but the increase is very nice, especially torque. I would live with those numbers though and they are not just peak number. You will see bigger torque in midranges and top end. Sweet.
ROAD/RACE
ROAD/RACE
Last edited by ROCK; Jun 19, 2007 at 11:03 AM.
I'd be really curious to see total gains from the cam and this head. Anyone running both?
I think it'd be really nice to see the full RRM NA offerings on a car before and after.
udp/piggy/cai or sri/I/M/head/cam/header/HF Cat/CBE.
Any guess on what those numbers might be?
If I had to guess I'd say right around ~200whp. Any guesses anyone? Rock - does anyone have this full setup that you are in contact with? What'd be your guess?
I think it'd be really nice to see the full RRM NA offerings on a car before and after.
udp/piggy/cai or sri/I/M/head/cam/header/HF Cat/CBE.
Any guess on what those numbers might be?
If I had to guess I'd say right around ~200whp. Any guesses anyone? Rock - does anyone have this full setup that you are in contact with? What'd be your guess?
Evolving Member
Joined: Sep 2005
Posts: 248
Likes: 5
From: Bridgeport (c.t.)
10.7hp, not bad. How about posting up the dyno chart? Numbers aren't low, thats the expected power RRM estimates from their cams - 10-15hp.
I guess with a tune you would've expected a little more, but at least your torque increased significantly.
Everyone nowadays seems to have numbers without charts
Ah well, i'll drink to your results
I guess with a tune you would've expected a little more, but at least your torque increased significantly.
Everyone nowadays seems to have numbers without charts
Ah well, i'll drink to your results
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
.
This is true, but I think that Migues DIY work may end up producing higher numbers, hes doing "secret things" that he hasn't mentioned that may be significant.
In this particular case I think it would just be nice to see what the full RRM NA "catalog" could do for a RA kinda before and after.
have to be smaller than 100k though, best to host them somewhere and link up. putfile.com or something similar.
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
Evolving Member
Joined: Sep 2005
Posts: 248
Likes: 5
From: Bridgeport (c.t.)
